ABBYB161102-AC DSQC102 robot module

ABBYB161102-AC DSQC102 robot module

Technical data of product parameters

The rules given
terested parties.
below are general and obligatory for the in4.1 Sam pling s hall be carried out by
authorized by the seller a nd/or purchaser.
qualified samplers
4.2 Sampling should preferably be carried out during
ing immediately before or immediately after weighing.
hanYB161102-AC DSQC102  Sampling shall be carried out by a systematic method
with a random start. Sampling from wagons shall be conducted
by the two-stage method or the stratified method.
4.4 The mass of the increment shall be determined in accordance with the maximum particle size of the ore in order to
avoid the introduction of bias at the time of collecting the
sample.
4.5 The number of Table 1 – Mass of increment in manual sampling increments to be taken from a consignment shall be determined according to the quality variation of
the ore and the required precision of sampling. urn parti
size
Minimum mass
of increment
mm I kg 4.6 Throughout all the procedures of sam
shall be protected from any contamination.
pling, the samples

4.7 All sampling methods shall be demonstrated to have no
bias (see IS0 3086).
4.8 When the planned number of increments has been taken
before the handling has been completed, additional increments
shall be taken at the same interval until the handling operation
is completed.YB161102-AC DSQC102 The mass of increment, ml, in kilograms, taken by
means of mechanical samplers from the ore stream, is directly
proportional to the flow rate of the belt conveyor and to the
cutting aperture of the sampler, and inversely proportional to
the cutter speed of the sampler; it may be calculated by the
equation
5 Methods of sampling in generaYB161102-AC DSQC102

Product picture display

Company advantages

Warranty: Seven day acceptance period, one year warranty period

Delivery period: 1-3 working days

Advantages: supply of imported genuine products, professional off production accessories, fast delivery and accurate delivery

Main products: Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

Main brands:

ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

reminder

For more products, please contact the email for inquiry 1849076084@qq.com

This article is from  https://www.onewwww.com/