ABB 07YS03/GJR2263800R3m module card

ABB 07YS03/GJR2263800R3m module card

Technical data of product parameters

MOTIONLINK gives you three methods to configure the drive. The first uses a Startup Wizard and is
the easiest and most highly recommended approach. Its main purpose is for initial startups. The second
approach allows you to more indirectly perform the same configuration as the first using the Main
MOTIONLINK screen. This method is most convenient when corrections to an existing configuration
are required. The third method uses the Terminal Mode screen to directly set (or monitor) values for the
same variables and commands that the other two methods configure through a more friendly user
interface. You can gain a more thorough understanding of the SERVOSTAR drive,07YS03/GJR2263800R3m
and its variable and command set by using the context-sensitive Help (F1) provided in 07YS03/GJR2263800R3m
When you begin, the first screen you see is:
Startup Wizard
This screen appears the first time (and any time after should you choice not to deselect it)
MOTIONLINK is run on a PC. It is designed to guide you through a step-by-step approach to configure
a drive. Click the “START” button on the first user screen and walk through the complete sequence of
buttons provided to set the drive, motor, and application 07YS03/GJR2263800R3m you de-activate this screen, it can be reactivated by going to the Main
MOTIONLINK screen, pulling down the Configuration menu, and selecting the New Drive
07YS03/GJR2263800R3mVariable Parameters: Click the Drive button. This screen allows you to select a BUS
value that corresponds to the incoming line voltage. This selection actually determines the setting of the
variable VBUS. Also included is a realtime monitoring of the DIP switch on top of the drive so you can
verify the proper setting for the drive address, baud rate, and various other parameters. Click Exit to
return to the Startup Wizard screen.
Setting Motor Variable Parameters: Click the Motor button. This screen allows you to access the
MOTIONLINK motor database. Select a motor family and then a model within that family.
Information will appear in the blank parameter fields on the right. Click on the “To Drive” button
beneath the fields to send the variable parameters to the drive. Click “Exit” to return to the
StartupWizard screen.

Product picture display

Company advantages

Warranty: Seven day acceptance period, one year warranty period

Delivery period: 1-3 working days

Advantages: supply of imported genuine products, professional off production accessories, fast delivery and accurate delivery

Main products: Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

Main brands:

ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

reminder

For more products, please contact the email for inquiry 1849076084@qq.com

This article is from  https://www.onewwww.com/