YPK112A 3ASD579001A13 ABB module
Technical data of product parameters
PowerStage Fault (OverCurrent): Hardware circuitry monitors load short-circuit, transistor failure,
and instantaneous OverCurrent. In general, toggling the Remote Enable cannot reset a power stage fault.
Power must be cycled. A flashing ‘P’ in the status display indicates this condition.
Low-voltage power supply faults: Out of tolerance values on the ± 12 VDC analog supplies will cause
an ‘A’ to be displayed and disable the drive.
OverSpeed fault: Software continuously monitors the actual (feedback) speed. If the motor speed
exceeds theYPK112A 3ASD579001A13 and the drive is disabled. This normally occurs when there
is an improperly-tuned system and the load overshoots its commanded speed.
No compensator: In case the SERVOSTAR cannot design a compensator (after YPK112A 3ASD579001A13 command,
CLREEPROM, or any change in the motor or drive parameters), a flashing minus sign (-) is displayed
and causes the drive to disable. This display normally indicates the drive does not have a compensation
YPK112A 3ASD579001A13reliability: During the initialization process upon power up, the runtime, variables memory
(RAM – Random Access Memory), and the program memory (EPROM – Electrically Programmable Read
Only Memory) are tested.
If a RAM fault is detected, an ‘I’ is displayed and the drive is halted. If anYPK112A 3ASD579001A13, a ‘c’ is displayed and the drive is halted.
The user configuration non-volatile memory YPK112A 3ASD579001A13is also checked for integrity upon power-up. Any discrepancy in this data is
noted with an ‘e’ in the status display. After power-up is successfully completed, any subsequent
fault in the operation of the EEPROM is noted with an ‘E’ in the status display.
Product picture display
Company advantages
Warranty: Seven day acceptance period, one year warranty period
Delivery period: 1-3 working days
Advantages: supply of imported genuine products, professional off production accessories, fast delivery and accurate delivery
Main products: Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.
Main brands:
ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc
reminder
For more products, please contact the email for inquiry 1849076084@qq.com
This article is from https://www.onewwww.com/
Reviews
There are no reviews yet.