BB510 3BSE001693R2 ABB module

BB510 3BSE001693R2 ABB module

Technical data of product parameters

The environment into which any electronic control system is
installed can effect its operation. Danaher Motion recommends the
SERVOSTAR system be operated and stored under the
environmental conditions stated in the product specification tables.
The system can operated in higher temperature ambient conditions
with a derating applied. Check with the factory for derating info.
Attention to proper installation and field wiring are of prime
importance to ensure long-term and trouble-free operation. Users
should familiarize themselves with and follow the installation andSR511 3BSE000863R0001 instructions listed in this section. In addition to these
practices, some localities and industries may require applicable
electrical and safety codes, laws, and standards.
Particular care should be used when designing the layout of anSR511 3BSE000863R0001 Efforts to separate power wires from small signal wires
should be taken. The following guidelines highlight some importantSR511 3BSE000863R0001 practSR511 3BSE000863R0001Control and signal cables must be separated from power and
motor cables. A distance of 20 cm (8 in.) is typically sufficient.
− Control and signal cables must be shielded to reduce the
effects of radiated interference.
− Where control cables must cross power or motor cables, theySR511 3BSE000863R0001cross at a 90º angle, if possible. This reduces the field
coupling effect.
5.1 Enclosure
The Danaher Motion SERVOSTAR series of electronic system
components are designed for panel assembly. This panel assemblyd then be mounted in a metallic enclosure. Enclosures are
supplied by the manufacturers of the final product and must meetnvironmental IP rating of the end product. To ensure properding (and to optimize EMC), the enclosure should have
continuous ground continuity maintained between all metal panel

Product picture display

Company advantages

Warranty: Seven day acceptance period, one year warranty period

Delivery period: 1-3 working days

Advantages: supply of imported genuine products, professional off production accessories, fast delivery and accurate delivery

Main products: Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

Main brands:

ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

reminder

For more products, please contact the email for inquiry 1849076084@qq.com

This article is from  https://www.onewwww.com/