SSA-G1018-0652 industrial control product ENTERASYS module system module PL

SSA-G1018-0652 industrial control product ENTERASYS module system module PL

Technical data of product parameters

The SSA-G1018-0652 power supply does not have to be wired extra as it is already
part of the installation.
To supply the I/O racks, on the rear of the central rack the supply voltage
5 V DC and the appertaining GND is available.
The 5 V DC power needed for the microprocessor system and as control
current for the I/O modules is generated from the 24 V DC power of the
system via clocked 24 V DC / 5 V DC power supply modules bearing the
F 7126 identification. One central rack can be equipped with a maximum
of 3 power supply modules. The power supply modules are switched in
parallel. One or two power supply modules are usually able to supply the
PES. A further power supply module is used to increase availability.
The output voltage of the power supply modules is checked as to undervoltage or failure by a monitoring module F 7131.
In case of a faulty power supply module the operating system supplies the
user’s program via a system variable with this information.
In case the SSA-G1018-0652 system power fails hardware clock and sRAM on the central module are buffered by one lithium battery on the central module.
Two lithium batteries on the power supply monitoring module F 7131 are
to buffer the sRAM on the coprocessor module.The data connection of the I/O level with the central device is established
via the I/O bus. Because the I/O bus is redundant each central device has
its own I/O bus and thus also separated own I/O subracks. The 1st I/O bus
is associated to central module 1 and the 2nd I/O bus associated to central
module 2. SSA-G1018-0652
The I/O bus coupling modules are already integrated in the central rack.
With the I/O subrack the connection to the I/O bus is via a coupling module
F 7553 installed in slot 17. The connection of the bus between the individual subracks is established at the rear side via the BV 7032 data cable.
To terminate the I/O bus, an F 7546 module is plugged in at the beginning
and the end.
The construction principle of the I/O bus is shown on the following page.The 5 V DC power supply does not have to be wired extra as it is already
part of the installation.
To supply the I/O racks the 5V DC power supply with corresponding GND
is available at the rear side of the central rack.
The 5 V DC power needed for the microprocessor system and as control
current for the I/O modules is generated from the 24 V DC power of the
system via clocked 24 V DC / 5 V DC power supply modules bearing the
F 7126 identification. One central rack can be equipped with a maximum
of 3 power supply modules. The power supply modules are switched in
parallel. One or two power supply modules are usually able to supply the
PES. A further power supply module is used to increase availability.
The output voltage of the power supply modules is checked as to SSA-G1018-0652undervoltage or failure by the monitoring module F 7131.

Product picture display

bout us service idea

Since its inception, the company has always insisted on pure e-commerce mode of operation, reducing the intermediate links, for customers in the first time to provide quality products and satisfactory service, for your production and procurement work to provide ‘safe, fast and convenient’ the company has a sound logistics supply system, has established a good partnership with many well-known foreign brand manufacturers.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com