Emerson 5X00062G01 DCS card

Emerson 5X00062G01 DCS card

Technical data of product parameters

For example, you can 5X00062G01 replace the pull-up resistor with a 1 MΩ, 10-pin bused configuration resistor network (not included) and have a sample rate of 20 kHz (interchannel delay of 50 µs typical). With a 10 Ω bias resistor network, the current leakage would be 5 µA (5 V ÷ 1 MΩ), which can result in a larger offset error because of thermocouple lead resistance. Use long-nose pliers to remove or replace the resistor networks in the sockets; be careful not to damage the network 5X00062G01 package. Make sure that pin 1 of each network is in the correct socket. Refer to Figures 4 and 7 for correct network placement.With 10 MΩ pull-up and bias resistors, a common-mode voltage of 2.5 VDC develops if the thermocouple is floating. At a gain of 100, the common-mode rejection of the SCXI-1102/B/C module is sufficiently high so that the resulting offset voltage is negligible. If the application demands extremely high accuracy, you can eliminate this offset error by calibrating the system. Refer to the module documentation for more information on calibration. You can also remove the pull-up resistor, which eliminates the open-thermocouple detection feature, or use the 10 Ω bias resistor networks, which bring the common-mode voltage down to nearly 0 VDC.The open-thermocouple detection circuitry results in a small current leakage into the thermocouple. With the 5X00062G0110 MΩ bias and pull-up resistor networks, the current leakage results in a negligible error. With the 10 Ω bias resistor, System 800xA Extended Automation The Power of Integration Promoting collaboration Collaboration between people and systems is a necessity to increase engineering efficiency, asset utilization, energy savings, and operator effectiveness. System 800xA’s ‘xA’ stands for Extended Automation and utilizes the Industrial IT architecture which was built for collaboration. System 800xA is the only 5X00062G01 automation platform that has the ability to engineer, commission, control, and operate automation strategies for process, power, electrical and safety in the same, redundant, reliable system. Also, facilitating collaboration is System 800xA’s pre-integrated applications such as a full featured historian, asset optimization and batch management.System

Product picture display

bout us service idea

Since its inception, the company has always insisted on pure e-commerce mode of operation, reducing the intermediate links, for customers in the first time to provide quality products and satisfactory service, for your production and procurement work to provide ‘safe, fast and convenient’ the company has a sound logistics supply system, has established a good partnership with many well-known foreign brand manufacturers.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com