EPSCPE100-ABAC supply industrial control spare parts card module

EPSCPE100-ABAC supply industrial control spare parts card module

Technical data of product parameters

This resets the protection circuit, which latches when it
operates, and the red LED extinguishes.
The protection circuit guards against excessive feedback
from the generator and interrupts the injection for zerocrossing currents 5 A.
The protection circuit will not reset, if the fault that caused it to
pick up is still present. In such a case, switch off the supply and
check the external wiring for short-circuits and open-circuitsThe input voltage, the injection frequency and the opto-couplerEPSCPE100-ABAC
voltage must be specified in the customer’s order and are then
set in the works prior to delivery.
There are no controls inside the unit which have to be set by the
user.The same injection transformer is used for stator and rotor protection schemes.
The rated values of the injection voltages Uis, Uir and Ui apply
for the version REX 010 U1 and a station battery voltage of UBat
= 110 V DC.
All the voltages are less by a factor of 96/110 = 0.8727 in the
case of versions U2 and U3. EPSCPE100-ABAC
Thus the primary injection voltage for the stator circuit is 96 V.The connections to the primary system are made via the two
heavy-duty terminals 10 and 15 of Type UHV which are
designed for spade terminals. There are four Type UK35
universal terminals 11 to 14 which are used for the internal
wiring between the two heavy-duty terminals.
Depending on the version, the four windings must be connected
to the corresponding universal or heavy current terminals.
Should the version supplied not be the correct one, the
connections from the windings to the terminals must be changed
as shown in the following diagrams. EPSCPE100-ABAC
In the case of versions M12, M22, M13 and M23, KB-15 shorting
links must be fitted to the universal terminals. How this is done
can be seen from the diagram marked “Shorting links” at the end
of this Section.
If the green LED ‘READY’ is not lit in the case of version U1 although the correct auxiliary supply voltage is applied, check and
if necessary replace the fuse on the supply unit 316NE61. The
m.c.b. is located at the rear next to the auxiliary supply terminals.

Product picture display

bout us service idea

Since its inception, the company has always insisted on pure e-commerce mode of operation, reducing the intermediate links, for customers in the first time to provide quality products and satisfactory service, for your production and procurement work to provide ‘safe, fast and convenient’ the company has a sound logistics supply system, has established a good partnership with many well-known foreign brand manufacturers.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com