EMERSON CE3008 KJ2005X1-MQ1 12P6381X022 system card

EMERSON CE3008 KJ2005X1-MQ1 12P6381X022 system card

Technical data of product parameters

ONICON offers an alternative installation hardware kit when it is not practical to relieve
pressure and drain the system. In this case, a 1¼” branch outlet, a close nipple and a 1¼”
full port ball valve are installed first. Then, a hot tap drilling apparatus is used to drill a 1”
diameter hole through the valve. This eliminates the need to stop flow and drain the
pipe. Please read all instructions before proceeding with meter insertion.There are occasions where circumstances require that the customer provide the CE3008 KJ2005X1-MQ1 12P6381X022
installation hardware or that the flow meter be installed through existing hardware.
In these cases, it is important to confirm that the installation hardware is suitable for use
with the flow meter provided by ONICON before it is installed. The installation must
allow for sufficient overhead clearance to fully extract the meter, must not be too tall
where the meter cannot reach the appropriate depth, and a full 1” opening in the pipe wall
is required to clear the sensor head and allow for insertion. Make sure that your valves and
fittings are full port and at least 1” in actual internal diameter.Prior to installing the meter, confirm that the stack height recorded on the tag is close to CE3008 KJ2005X1-MQ1 12P6381X022
the actual stack height. Flow meter stems are intentionally over sized to allow for
variations of at least 2” in the stack height. Contact ONICON prior to installation if there
is any question regarding stack height or stem length. This will allow ONICON to offer
you credit for your meter if you decide to exchange the meter for one with a different stem CE3008 KJ2005X1-MQ1 12P6381X022
length. Returns may be subject to a restocking fee.After fitting the necessary plumbing hardware, flush the
entire system so that it is free of flux, solder and slag.
Prepare to install the flow meter by loosening the clamping
nut and withdrawing the turbine assembly fully into the
hot tap adapter. Next, thread the adapter on to the ball
valve using a paste type thread sealant. Do not use Teflon
tape as torn strands of the tape may wind around the
turbine, slowing down or even stopping the turbine

Product picture display

bout us service idea

We are able to supply equipment and spare parts from different countries and manufacturers. We can solve the trouble you find in many places or worry about the quality of our products. We have great advantage on the price, E-mail the detailed information of our products. We sincerely welcome you to inquire by phone or use!

With the business philosophy of “professionalism, integrity, innovation, cooperation and win-win”, we continue to develop new products, provide high-quality services to customers, pursue customer satisfaction to the maximum extent, and continue to develop new areas of business.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com