GE DS200DCFBG1BNC control module, in stock

GE DS200DCFBG1BNC control module, in stock

Technical data of product parameters

For installations with a limited straight run of pipe (less than the recommended distances
shown on pages 10 and 11), adjustments in insertion depth may be needed to compensate for
velocity flow profile variations. Please contact the factory for information on velocity flow DS200DCFBG1BNC
profiling for determining the average velocity location in undeveloped flow locations.Remember, the meter may be under high pressure. And while removal of the meter is basically the
reverse of the insertion procedure detailed above, care must be taken to ensure that the meter is
supported against the pipe pressure before the position clamping nut is loosened. Failure to do this
will allow the pressure to suddenly and rapidly force the meter from the pipe causing serious injuryIf adjustment of the meter depth is required, the same procedure must be followed as if the meter
were being removed. Please carefully read the section below on removal of the meter. Remember, the DS200DCFBG1BNC
meter may be under high pressure and failure to follow the procedure may result in serious injury.Continue to hold the meter in place after the valve is completely closed to prevent the turbine
assembly from slipping back into the valve body. Slowly unscrew the hot tap adapter from the
valve. Once the adapter is loosened, allow pressure to vent from inside the hot tap adapter before
removing it from the valve. There will be a small amount of water inside the hot tap adapter.The most common cause of electronic failures are mis-wired connections. If you are adding
additional cable, please r DS200DCFBG1BNC
from ONICON, the color code can be maintained. Cable from other sources will most likely have a
different set of colors. Please refer to Appendix A for wiring diagrams and factory color codes.
Only qualified service personnel should make connections between the flow meter and the user’s
external equipment. Any misapplication of power and/or ground can result in improper operation
or damage to the flow meter circuitry, and to any externally connected equipment

Product picture display

bout us service idea

We are able to supply equipment and spare parts from different countries and manufacturers. We can solve the trouble you find in many places or worry about the quality of our products. We have great advantage on the price, E-mail the detailed information of our products. We sincerely welcome you to inquire by phone or use!

With the business philosophy of “professionalism, integrity, innovation, cooperation and win-win”, we continue to develop new products, provide high-quality services to customers, pursue customer satisfaction to the maximum extent, and continue to develop new areas of business.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com