KEBA FM265A communication card

KEBA FM265A communication card

Technical data of product parameters

transducers require a +12VDC (+24VDC optional) power supply
with a minimum current rating of 200mA to operate. The operating power input is FM265A
supplied via the DC power jack or the 9-pin “D” connector located at the side of
the flow transducer enclosure. On FMA 1700/1800’s purchased without an LCD
readout, a readout panel meter, digital multimeter, or other equivalent device is FM265A
required to observe the flow signal.In general, “D” Connector numbering patterns are standardized. There are, however, some connectors with nonconforming patterns and the numbering sequence
on your mating connector may or may not coincide with the numbering sequence
shown in our pin configuration table above. It is imperative that you match the
appropriate wires in accordance with the correct sequence regardless of the particular numbers displayed on your mating connector.
Make sure power is OFF when connecting or disconnecting any cables in the system. FM265A
When connecting power to the FMA 1700/1800 mass flow meter via the DC
power jack, do not connect any power supply to the 9-pin ‘D’ Connector. The DC
power jack has a center positive polarity.
When battery use is required to power the FMA 1700/1800, use only the optional battery and accompanying charger available from OMEGA7.
The power input is protected by a 750mA M (medium time-lag) resettable fuse. If
a shorting condition or polarity reversal occurs, the fuse will cut power to the flow
transducer circuit. Disconnect the power to the unit, remove the faulty condition,
and reconnect the power. The fuse will reset once the faulty condition has been FM265A
removed. FMA 1700/1800 Mass Flow Meters are available with optional remote reading
LCD displays supplied with a three foot long wire to accommodate most applications. This configuration includes the upper block element which serves as the
LCD readout mounting. Special lengths of remote extension wiring (up to 9.5 feet
[3 meters]) are available on request.

Product picture display

bout us service idea

We are able to supply equipment and spare parts from different countries and manufacturers. We can solve the trouble you find in many places or worry about the quality of our products. We have great advantage on the price, E-mail the detailed information of our products. We sincerely welcome you to inquire by phone or use!

With the business philosophy of “professionalism, integrity, innovation, cooperation and win-win”, we continue to develop new products, provide high-quality services to customers, pursue customer satisfaction to the maximum extent, and continue to develop new areas of business.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com