GE UR9EH control module

GE UR9EH control module

Technical data of product parameters

Place the receivers around 0.4 metres above the modelled ‘audience box’.
An obsolete alternative solution was to model the audience just as a flat absorptive surface on the UR9EH
floor, mainly for simplifying the model for computational issues. The main problem with this
approach was that the absorption area of the room looked smaller, as more rays were likely to hit
a hard surface (like the isles between audience areas,) than it would be in real life. In order to
compensate for that, the same absorptive material had to be assigned to the isles too. Nowadays,
there is no need to follow this approach. By modelling audience as a box this has been proved to
be a realistic and reliable assumption, without affecting the computational cosIf a tabletop is close to a source or receiver point,then it is likely to produce a strong specular
reflection towards the receiver, so if this is the case
then it should be included. However, the legs of a
chair or table should not be modelled in detail. Furniture such as shelves and screens in large office UR9EH
environments, which subdivide the room – breaking up long reflection paths and introducing extra
absorption and scattering, should not be omitted. Furniture at more distant locations in the room,
which does not produce any strong early reflections to the receiver, can easily be simplified, or
even omitted from the model. This as long as the extra absorption and scattering produced by that UR9EH
furniture is somehow included on other surfaces in the same regions of the roomSmall changes to the orientation of surfaces can indeed cause dramatic changes. Making dominant
surfaces slightly off-angle can cause extra scattering in the room, almost as if extra scattering had
actually been assigned to the surfaces in the room. A typical example is a box-shaped room where
a flutter-echo can be removed, by changing the angle of a surface by just a degree or two.
When importing a geometry, ODEON creates a group of subsequent room files, calculation files
and result files. These should normally not be accessed outside ODEON.
All files share the same name – the name of the room – with a different extension added. Three main
categories of files are used

Product picture display

bout us service idea

We are able to supply equipment and spare parts from different countries and manufacturers. We can solve the trouble you find in many places or worry about the quality of our products. We have great advantage on the price, E-mail the detailed information of our products. We sincerely welcome you to inquire by phone or use!

With the business philosophy of “professionalism, integrity, innovation, cooperation and win-win”, we continue to develop new products, provide high-quality services to customers, pursue customer satisfaction to the maximum extent, and continue to develop new areas of business.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com