HIER464920P0001 communication card

HIER464920P0001 communication card

Technical data of product parameters

The following modules may only be installed in the I/O subrack B 9301 assembly kit: F 3311,
F 3312, F 3313, F 3314, F 3321, F 3323, F 3412, F 3413, F 6701. There are many specialties
(watchdog shutdown etc.) with installation in the I/O subrack B 9302, so it is urgently advised
against the use of this kit with these modules. The faultless operation of the modules in B 9302 HIER464920P0001
kit is not guaranteedThe TÜV certificate of the testable, SIL 3 modules (F 3313, F 3314
and F 3323) is expired cause of changing of the corresponding standard.
Therefore an application for new plants is not admissible.
Because of the new designed realization of the shutdown in the
B 9302 assembly kit the supply voltage of an old output module can
not be switched off automatically in case of a defective central module
and so the outputs of the corresponding module can not be reset independent from the CPUTo the right of each central module one coprocessor module (F 8621A) or one communication
module (Ethernet: F 8627/F 8627X, Profibus-DP: F 8628/F 8628X) can be installed. If they are
operated in redundant mode, the same type has to be used.The modules of the HIMA PES H41q and H51q may be removed and
inserted if the following rules are observed. The modules must be removed from the bus board uninterruptedly by means of the ejection lever (front label) to prevent faulty signals in the system, which can trigger
a shutdown.
The modules may not be cant by a screwdriver or by vibrations.
HIMA takes no responsibility for damages resulting from insertion and
removing of the modulesIf the module is removed without switching off, the watchdog signal for HIER464920P0001
all I/O subracks is shut down. This results in an error stop for MS and
HS systems.Check the settings of the switches and jumpers according to the HIER464920P0001
2. remove the fixing screws of the front plate completely until to the limit,
3. set the module onto its connector and then insert it uninterruptedly until to the stop to prevent faulty signals in the system,
4. fix the screws,
5. plug in the data cables and fix their screws.

Product picture display

bout us service idea

We are able to supply equipment and spare parts from different countries and manufacturers. We can solve the trouble you find in many places or worry about the quality of our products. We have great advantage on the price, E-mail the detailed information of our products. We sincerely welcome you to inquire by phone or use!

With the business philosophy of “professionalism, integrity, innovation, cooperation and win-win”, we continue to develop new products, provide high-quality services to customers, pursue customer satisfaction to the maximum extent, and continue to develop new areas of business.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com