Emerson MVME6100 board

Emerson MVME6100 board

Technical data of product parameters

You only have to MVME6100 plug an additional I/O base unit into the side socket on an
installed I/O base unit. The command busses on the I/O base units do not need
different terminations on the open ends of transmission lines, and the data
response busses and power sources are supplied across all I/O base units.
Termination assemblies are pushed into the I/O base unit for the additional I/
O modules. To put the new modules on-line and make the changes to the
system fully operational, the hardware configuration in the AADvance®
Workbench software must be updated by an on-line update.The T9100 processor base unit command and response busses and system
power for I/O modules are output by the two connectors on each side of the
base unit:
• The right-hand connector (specified I/O bus 1 in the project tree
configuration) mates with a connector on the T9300 I/O base unit. I/O
bus 1 supports a maximum of eight I/O base units and 24 I/O modules.
• The left-hand connector (specified I/O bus 2 in the project tree MVME6100
configuration), mates with the T9310-02 Backplane Expansion Cable,
which will connect it to another T9300 I/O base unit. I/O Bus 2 supports a
maximum of 8 I/O base units and has response lines for a maximum of
24 I/O modules.
The expansion cable carries module power, command busses and individual
response busses for each I/O module. MVME6100
An important advantage of the AADvance design is the option to add
redundant modules to increase fault tolerance as an when they are required.
Redundant configurations let you replace faulty modules without affecting the
system operation.
This flexibility and operational persistence is made possible by Termination
Assemblies that supply redundant I/O module capacity. By installing a triple
termination assembly you can configure the I/O and use it in a simplex, dual or
triple redundant arrangement.
The AADvance controller, therefore, gives an economical solution for
redundancy and fault tolerance expansion. You can install the termination
assemblies and base units for increased capacity in the future, then add the
extra I/O modules only when you actually need them.You can expand an AADvance system by adding more controllers to create a
distributed system. The AADvance Discover (Discovery and Configuration
utility) enables you to connect to external controllers

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com