CR-GEN0-M6400R3 monitoring output module

CR-GEN0-M6400R3 monitoring output module

Technical data of product parameters

 After the CR-GEN0-M6400R3 Contact Input Module power is cycled, this bit is “0.” A “1”
must be written to the Configure Module bit. If the module is not configured in this manner, an attention status will be sent to the Controller
upon an attempt to read the point data.The GND Fault Attention Enable bit is “0” after the Contact Input module power is cycled. This bit must be set by the Controller if a ground
fault is to be treated as a catastrophic failure. If Bit 9 is set, a ground fault
will cause an attention status to be returned to the Controller upon accessing the module, and no point data can be read. If the bit is not set, a
ground fault will not inhibit the Controller from reading point data. In
the latter case, if more than one ground fault occurs on the field wiring
to a Contact Input Module, false point data may possibly be read on
channels with open contacts.The Compact Contact Input Module, comprised of an Electronics module, provides CR-GEN0-M6400R3
16 contact input current detecting channels with common returns. The field side
circuitry and terminal connections for three channels are shown in Figure 9-2.
Additionally, a foam insert that includes a wiring diagram is available for placement CR-GEN0-M6400R3
in the Personality module cavity in the base unit.
A +48V on-board power supply provides current limited contact wetting voltage if
the contact is open. If the contact closes, current is drawn from the +10V supply
which turns on the associated opto-isolator; thereby, relaying a closed contact state CR-GEN0-M6400R3
to the I/O bus. The opto-isolators and the isolation provided by the 10V and 48 Volt
power supply provide high dielectric isolation between the field side and the logic
or I/O bus side

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com