ABB TB711FC1 3BDH000365R0001 spare parts

ABB TB711FC1 3BDH000365R0001 spare parts

Technical data of product parameters

The TB711FC1 3BDH000365R0001 Input configuration contains 16 channels, where each channel has
voltage level sensing circuitry used to detect whether an input is on or off. The
Sequence of Events module has 16 isolated differential inputs to accommodate
separate external auxiliary supplies, or 16 single-ended (common return) digital
inputs with an on-card blown fuse detector to accommodate a common external
auxiliary supply for all channels. The selection of the Personality module
determines if the inputs are differential or single-ended. The input voltage level TB711FC1 3BDH000365R0001
monitored by the module is determined by the particular card group in the module.
The field side circuitry for the single-ended configuration is shown in Figure 20-1,
and the differential configuration in Figure 20-2. An input resistor provides the
normal mode surge protection and limits the current during normal operation. An
opto-isolator provides high dielectric isolation between the field side and the logic
or I/O bus side. The Single-Ended Digital Input configuration has a circuit used to TB711FC1 3BDH000365R0001
monitor the presence of the wetting supply. Two cases cause this monitor circuitry
to report a blown fuse status and issue an attention status to the Ovation Controller:The Contact Input configuration provides 16 contact input current detecting
channels with common returns. The field side circuitry and terminal connections for
three of these channels are shown in Figure 20-3.
A +48V on-board power supply provides current limited contact wetting voltage if
the contact is open. If the contact closes, current is drawn from the +10V supply
which turns on the associated opto-isolator; thereby, relaying a closed contact state
to the I/O bus. The opto-isolators and the isolation provided by the 10V and 48 V
power supply provide high dielectric isolation between the field side and the logic TB711FC1 3BDH000365R0001
or I/O bus side.
There are two methods of wiring field devices to the termination block as shown in
Figure 20-3. Each field contact may have a separate input and return line as shown
for channel 1. Alternatively, field contacts wired to the same module may share a
return line as shown for channels 2 and 3. For either wiring method, do not tie the
contact return line to earth ground or a ground fault condition will occur as well as
a degradation of the common mode surge protection.

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com