GE VMIPCI-5565-11000 spare parts

GE VMIPCI-5565-11000 spare parts

Technical data of product parameters

Timer accuracy refers to VMIPCI-5565-11000 the length of time between the moment a timer
instruction is enabled and the moment the timed interval is complete.
Inaccuracy caused by the program scan can be greater than the timer timebase.
You must also consider the time required to energize the output device.
Timing accuracy is -0.01 to 0 seconds, with a program scan of up to 2.5
seconds. The 1-second timer maintains accuracy with a program scan of up to VMIPCI-5565-11000
1.5 seconds. If your programs can exceed 1.5 or 2.5 seconds, repeat the timer
instruction rung so that the rung is scanned within these limits.Use the TON instruction to turn an output on or off after the timer has been on for a preset time interval. The TON instruction begins to count timebase
intervals when rung conditions become true. As long as rung conditions
remain true, the timer adjusts its accumulated value (ACC) each evaluation
until it reaches the preset value (PRE). The accumulated value is reset when
rung conditions go false, regardless of whether the timer has timed out.Use the TOF instruction to turn an output on or off after its rung has been off
for a preset time interval. The TOF instruction begins to count timebase
intervals when the rung makes a true-to-false transition. As long as rung
conditions remain false, the timer increments its accumulated value (ACC)
based on the timebase for each scan until it reaches the preset value (PRE).
The accumulated value is reset when rung conditions go true regardless of
whether the timer has timed outThe CTU is an instruction that counts false-to-true rung transitions. Rung VMIPCI-5565-11000 transitions can be caused by events occurring in the program (from internal
logic or by external field devices) such as parts traveling past a detector or
actuating a limit switch. VMIPCI-5565-11000
When rung conditions for a CTU instruction have made a false-to-true
transition, the accumulated value is incremented by one count, provided that
the rung containing the CTU instruction is evaluated between these
transitions. The ability of the counter to detect false-to-true transitions
depends on the speed (frequency) of the incoming signalThe accumulated value is retained when the rung conditions again become false. The accumulated count is retained until cleared by a reset (RES)
instruction that has the same address as the counter reset.

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com