GE IC697CHS790 module

GE IC697CHS790 module

Technical data of product parameters

Enter the setpoint IC697CHS790 and deadband (word 9) in the same scaled
engineering units. Read the scaled process variable and scaled error in
these units as well. The control output percentage (word 16) is displayed
as a percentage of the 0 to 16383 CV range. The actual value transferred
to the CV output is always between 0 and 16383.
When you select scaling, the instruction scales the setpoint, deadband, process IC697CHS790
variable, and error. You must consider the effect on all these variables when
you change scaling.
Output Alarms
You may set an output alarm on the control output (CO) at a selected value
above and/or below a selected output percent. When the instruction detects
that the output (CO) has exceeded either value, it sets an alarm bit (bit 10 for
lower limit, bit 9 for upper limit) in word 0 of the PID control block. Alarm
bits are reset by the instruction when the output (CO) comes back inside the
limits. The instruction does not prevent the output (CO) from exceeding the
alarm values unless you select output limiting. IC697CHS790
Select upper and lower output alarms by entering a value for the upper alarm
(word 11) and lower alarm (word 12). Alarm values are specified as a
percentage of the output. If you do not want alarms, enter zero and 100%
respectively for lower and upper alarm values and ignore the alarm bitsYou may set an output limit (percent of output) on the control output. When
the instruction detects that the output (CO) has exceeded a limit, it sets an
alarm bit (bit 10 for lower limit, bit 9 for upper limit) in word 0 of the PID
control block, and prevents the output (CO) from exceeding either limit value.
The instruction limits the output (CO) to 0 and 100% if you choose not to
limit. IC697CHS790
Select upper and lower output limits by setting the limit enable bit (bit 3 of
control word 0), and entering an upper limit (word 11) and lower limit (word
12). Limit values are a percentage (0 to 100%) of the control output (CO).
The difference between selecting output alarms and output limits is that you
must select output limiting to enable limiting. Limit and alarm values are
stored in the same words. Entering these values enables the alarms, but not
limiting. Entering these values and setting the limit enable bit enables limiting
and alarms.

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com