PLC controller card 8106-TI-RT module GE

PLC controller card 8106-TI-RT module GE

Technical data of product parameters

If an interrupt 8106-TI-RT occurs while the SLC 5/03 (or higher) processor is performing
a multi-word slot update and your interrupt subroutine accesses that same slot,
the multi-word transfer completes prior to performing the interrupt
subroutine slot access.
Note that DII execution time adds directly to the overall scan time. During the
latency period, the processor is performing operations that cannot be
disturbed by the DII interrupt function. The Interrupt Latency Control Bit
(S:33/8) functions as follows. 8106-TI-RT
• When the bit is set (1) interrupts are serviced within the minimum time
possible. The time will vary depending upon which processor and
communication protocol you are using.
• The default state is cleared (0). When S:33/8 is clear (0), user interrupts
occur between rungs and I/O slot updates. To determine the interrupt
latency with S:33/8 clear, you must calculate the execution time of each
and every rung of your program, then the add the execution time of the
longest rung to the latency time.You can reconfigure the DII entirely or in part, depending on the particular
parameter(s) you choose. You can reconfigure some of the parameters simply 8106-TI-RT
by writing the new value over the old value. Other values require you to set the 8106-TI-RT
recon figuration bit in addition to writing the new value. The DII is
non-retentive and always reconfigures itself upon entry into the REM Run
mode. Refer to “DII Parameters” for details on reconfiguring each parameter.• DII Pending Bit (S:2/11) – When set, this bit indicates that the DII
Accumulator (S:52) equals the DII preset (S:50) and the ladder file
number specified by the DII File Number (S:46) is waiting to be
executed. It is cleared when the DII File Number (S:46) begins
executing, or on exit from the REM Run or REM Test mode.
• DII Enable Bit (S:2/12) – To program this feature, use the data monitor
function to set/clear this bit, or address this bit with your ladder
program. This bit is set in its default condition. If set, it allows execution
of the DII subroutine if the DII File Number (S:46) is non-zero. If clear,
when the interrupt occurs, the DII subroutine will not execute and the
DII Pending bit is be set. The DII function continues to run anytime
the DII file (S:46) is non-zero. If the pending bit is set, the enable bit is
examined at the next end of scan.

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com