GE 8101-HI-TX-02 DCS industrial control spare parts in stock

GE 8101-HI-TX-02 DCS industrial control spare parts in stock

Technical data of product parameters

Use the Discrete Inpu 8101-HI-TX-02 Interrupt (DII) for high-speed processing applications
or any application that needs to respond to an event quickly. This instruction
allows the processor to execute a ladder subroutine when the input bit pattern
of a discrete I/O card matches a compare value that you programmed.
The status file contains six bit values and six word values used to program and 8101-HI-TX-02
monitor the DII function. The DII does not require ladder logic instructions
for configuration. You program the DII to examine the input bit pattern of the
first bits of any single I/O slot, which contains any discrete input card (such as
IG16, IV16, IB8, IB32). When the input bit pattern matches the compare
value, the accumulator is incremented. The DII accumulator counts to the
preset value and, once the interrupt is generated, it immediately wraps around 8101-HI-TX-02
and begins counting again at zero.
While scanning the DII subroutine, you can reconfigure the DII to look for an
entirely different event. This facilitates DII sequencing. The DII can be
programmed to compare each input point to either a high (1) or low (0) state.
The accumulator is incremented on the input transition that causes the input
points to match the compare value.
IIM or IOM instructions are needed in the DII subroutine if your application
requires immediate update of input or output points. End the DII subroutine
with an RET instruction.For identification of your DII subroutine, use the INT instruction as the first 8101-HI-TX-02
instruction in your first rung.
The DII subroutine contains the rungs of your application logic. You can
program any instruction inside the DII subroutine except a TND, REF, or
SVC instruction. IIM or IOM instructions are needed in a DII subroutine if
your application requires immediate update of input or output points. End the
DII subroutine with an RET instruction.
JSR stack depth is limited to 3. You may call other subroutines to a level 3
deep from an DII subroutine.

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com