GE module model GE 8810-HI-TX-01 original off-the-shelf PLC module

GE module model GE 8810-HI-TX-01 original off-the-shelf PLC module

Technical data of product parameters

Bit Mask 8810-HI-TX-01 – You enter the bit-mapped value that
corresponds to the bits you wish to monitor on the discrete I/O module
(0 to 255). Only bits 0 to 7 are used in the DII function. Setting a bit
indicates that you wish to include the bit in the comparison of the
discrete I/O card’s bit pattern to the DII compare value (S:49). This
value is applied on detection of the DII Reconfigure bit, each DII ISR
exit, and at each end of scan 8810-HI-TX-01.
• Compare Value (Word S:49) – You enter a bit-mapped value that
corresponds to the bit pattern that must occur on the discrete I/O card
for a count or interrupt to occur (0 to 255). Only bit 0 to 7 are used in
the DII function. The bit must be set (1) or cleared (0) in order to satisfy
the compare condition for that bit. An interrupt or count is generated
upon the last bit transition of the compare value. This value is applied
on detection of DII Reconfigure bit, each DII ISR exit, and at each end
of scan8810-HI-TX-01
To provide protection from inadvertent data monitor alteration of your
selection, program an unconditional MOV instruction containing the
compare value of the DII to S:49.
• Preset (Word S:50) – When this value is equal to 0 or 1, an interrupt is
generated each time the comparison specified in words S:48 and S:49 is
satisfied. When this value is between 2 and 32767, a count occurs each
time the bit comparison is satisfied. An interrupt is generated when the
accumulator value reaches 1 or exceeds the preset value. This value is
applied on detection of DII Reconfigure bit, each DII ISR exit, and at
each end of scan8810-HI-TX-01.
To provide protection from inadvertent data monitor alteration of your
selection, program an unconditional MOV instruction containing the
preset value of the DII to S:50.
• Return Mask (Word S:51) – The Return Mask is updated immediately
preceding entry into the DII subroutine. This value contains the bit map
of the last bit transition that caused the interrupt. If more than one bit
transitions in the same 100µs DII sample period, it is included in the
return mask. This bit is cleared by the processor on exit from the DII
subroutine. Use this value to validate the last interrupt transition that
caused the input pattern to match the compare value.

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com