LDP1WC 250P-16 PLC module programmable controller

Status: In Stock

Warranty: Seven day acceptance period, one year warranty period

Delivery period: 1-3 working days

Advantages: supply of imported genuine products, professional off production accessories, fast delivery and accurate delivery

Main products: Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

Model : LDP1WC 250P-16

LDP1WC 250P-16 PLC module programmable controller

Technical data of product parameters

The MVME240x base board contains two banks of Flash memory. Bank LDP1WC 250P-16
B consists of two 32-pin devices which can be populated with 1MB of
Flash memory. Only 8-bit writes are supported for this bank. Bank A has
four 16-bit Smart Voltage Flash SMT devices. With the 16Mbit Flash
devices, the Flash size is 8MB. A jumper header associated with the first LDP1WC 250P-16
set of eight Flash devices provides a total of 128KB of hardware-protected
boot block. Only 32-bit writes are supported for this bank of Flash. There
will be a jumper to tell the Hawk chip where to fetch the reset vector. When
the jumper is installed, the Hawk chip maps 0xFFF00100 to these sockets Under normal operation, the Flash devices are in “read-only” mode, their
contents are pre-defined, and they are protected against inadvertent writes LDP1WC 250P-16
due to loss of power conditions. However, for programming purposes,
programming voltage is always supplied to the devices and the Flash
contents may be modified by executing the proper program command
sequence. Refer to the PFLASH command in the PPCbug Debugging
Package User’s Manual for further device-specific information on
modifying Flash contents.The SMC provides the interface for two blocks of ROM/Flash. Access
times to ROM/Flash are programmable for each block. Access times are
also affected by block width. The following tables in this subsection show
access times for ROM/Flash when configured for different device access
times.


Product picture display

LDP1WC 250P-16 PLC module programmable controller

 


About us 

Ruichang Mingsheng A company specializing in the sales of module spare parts for world-renowned brands (DCS systems) (robotic systems) (large-scale servo control systems), the company’s products include distributed control systems (DCS), programmable controllers (PLC), MOTOROLA MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (IPC), industrial low screen screens (IPC) HMI SCSI (50, 68, 80 Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components.

Email: onewwww@foxmail.com


Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands


reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com

 

LDP1WC 250P-16 PLC module programmable controller1

    Reviews

    There are no reviews yet.

    Be the first to review “LDP1WC 250P-16 PLC module programmable controller”

    Your email address will not be published. Required fields are marked *

    Back to Top
    Product has been added to your cart