VTS0234-47 AP025 module controller

VTS0234-47 AP025 module controller

Technical data of product parameters

When the Ethernet firmware is manually restarted by the Ethernet pushbutton in any state, the
EOK, LAN and STAT LEDs are briefly turned on in unison as an LED test. These three LEDs
are turned on for ½ second and are then turned off when the firmware is restarted. The VTS0234-47 AP025
Ethernet port LEDs are not affected by a manual restart of the Ethernet firmware.
The LED test is performed only upon a manual pushbutton restart; there is no LED test when
the Station Manager initiates a restart. The front of the CPU374 PLUS module has eight LEDs, an On/Off switch, an Ethernet Restart
pushbutton, a connector for the Station Manager function, and two Ethernet port connectors.
The Ethernet Restart pushbutton is used to manually restart the Ethernet firmware without
power cycling the entire system. It is recessed to prevent accidental operation. VTS0234-47 AP025
The PS (Power Supply) PORT LED is not Ethernet-related; it indicates the presence of serial
traffic through the serial port of the PLC’s power supply.
Each of the three Ethernet LEDs (EOK, LAN, and STAT) can be ON, OFF, BLINKING slow, or
BLINKING fast. These LEDs indicate the state of the Ethernet interface, traffic at the Ethernet
Interface (LAN LED), and the occurrence of exception events.
Each of the two Ethernet ports has two LEDs, 100 and LINK. The 100 LED indicates the
network data speed (10 or 100 Mb/sec). This LED is lit if the network connection at that VTS0234-47 AP025
network port is 100 Mbps. The LINK LED indicates the network link status and activity. This
LED is lit when the link is physically connected. It blinks when traffic is detected at that
network port. Traffic at the port does not necessarily mean that traffic is present at the
Ethernet interface, since the traffic may be going between ports of the switch.
The default station address (MAC address) label is located on the outside of the module as
shown above. Record the number on this label before installing the module.

Product picture display

About us 

Ruichang Mingsheng A company specializing in the sales of module spare parts for world-renowned brands (DCS systems) (robotic systems) (large-scale servo control systems), the company’s products include distributed control systems (DCS), programmable controllers (PLC), MOTOROLA MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (IPC), industrial low screen screens (IPC) HMI SCSI (50, 68, 80 Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com