REXRTOH controller SYHNC100-NIB-22aW-24-P-D-E23-A012

REXRTOH controller SYHNC100-NIB-22aW-24-P-D-E23-A012

Technical data of product parameters

The RS-232, 6-pin, RJ-11 port is used to connect a terminal or terminal emulator to access
the Station Manager software on the Ethernet interface. A cable is needed to connect the
terminal, emulator, or Software Loader to the Ethernet interfaceThe serial (COM) port of the terminal or computer that is connected to the Ethernet interface SYHNC100-NIB-22aW-24-P-D-E23-A012
must use the same communications parameters as the Ethernet interface.
The default values for the Station Manager port are 9600 bps, 8 bits, no parity, and 1 stop bit.
If the Ethernet interface is configured with default values for this port, or the Ethernet interface
has not been configured, use these default values. If the Ethernet interface is configured with SYHNC100-NIB-22aW-24-P-D-E23-A012
non-default values for this port, use those values for the serial port settings of the terminal or
computer. PING (Packet InterNet Grouper) is the name of a program used on TCP/IP networks to test
the ability to reach a destination by sending it an ICMP echo request message and waiting for
a reply. Most nodes on TCP/IP networks implement a PING command.
You should ping each installed Ethernet interface. When the Ethernet interface responds to
the ping, it means acceptable TCP/IP configuration information has been downloaded to the SYHNC100-NIB-22aW-24-P-D-E23-A012
Interface. The interface is operational and configured properly.
A ping command can be executed from a UNIX host or computer running TCP/IP (most TCP/IP
communications software provides a ping command) or from another Ethernet interface. When
using a computer or UNIX host, you can refer to the documentation for the ping command, but
in general all that is required is the IP address of the remote host as a parameter to the ping
command. For example, at the command prompt

Product picture display

About us 

Ruichang Mingsheng A company specializing in the sales of module spare parts for world-renowned brands (DCS systems) (robotic systems) (large-scale servo control systems), the company’s products include distributed control systems (DCS), programmable controllers (PLC), MOTOROLA MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (IPC), industrial low screen screens (IPC) HMI SCSI (50, 68, 80 Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com