Home › Articles posted by zhouyif (Page 40)

Archives

GE DS200TCCBG3BED Circuit Board Module Specification Parameters
Industry trends

GE DS200TCCBG3BED Circuit Board Module Specification Parameters

Here are the detailed specification parameters for the GE DS200TCCBG3BED circuit board module:

  • Power supply: +5VDC
  • Operating temperature range: 0°C to 60°C (32°F to 140°F)
  • Storage temperature range: -40°C to 85°C (-40°F to 185°F)
  • Communication protocols: Genius LAN, Ethernet, TCP/IP
  • Input voltage range: 0-5VDC, 0-10VDC, 4-20mA
  • Input impedance: 1MΩ (voltage input), 250Ω (current input)
  • Output voltage range: 0-5VDC, 0-10VDC, 4-20mA
  • Output impedance: 10Ω (voltage output), 250Ω (current output)
  • Isolation: 1500 VAC (input-to-output), 500 VAC (input/output-to-chassis)
  • Dimensions (HxWxD): 12.7 x 23.1 x 17.8 cm (5.0 x 9.1 x 7.0 in)
  • Weight: 0.7 kg (1.5 lb)

The module is powered by a +5VDC power supply and has an operating temperature range of 0°C to 60°C (32°F to 140°F). It can be stored in temperatures ranging from -40°C to 85°C (-40°F to 185°F).

The DS200TCCBG3BED module supports various communication protocols such as Genius LAN, Ethernet, and TCP/IP, allowing for flexible integration into different control systems.

The module has multiple input and output voltage ranges, including 0-5VDC, 0-10VDC, and 4-20mA. The input impedance is 1MΩ for voltage input and 250Ω for current input, while the output impedance is 10Ω for voltage output and 250Ω for current output.

The module has high levels of isolation, with 1500 VAC isolation between input and output channels and 500 VAC isolation between input/output channels and the chassis. This helps to protect the module and other components in the control system from electrical interference and potential damage.

The DS200TCCBG3BED has a compact design, with dimensions of 12.7 x 23.1 x 17.8 cm (5.0 x 9.1 x 7.0 in) and a weight of 0.7 kg (1.5 lb). It is designed to be hot-swappable, meaning it can be removed and replaced without interrupting the operation of the control system.

Overall, the GE DS200TCCBG3BED circuit board module is a highly capable and reliable component for industrial control systems, with advanced communication protocols, flexible input/output options, and robust isolation capabilities.

By April 23, 2023 0
GE DS3800HSHA Printed Circuit Board Details Introduction
Industry trends

GE DS3800HSHA Printed Circuit Board Details Introduction

The GE DS3800HSHA is a printed circuit board used in gas turbine control systems. Specifically, it is used in the General Electric Speedtronic Mark VIe control system, which is used in a variety of industrial applications.

The DS3800HSHA board is responsible for providing digital input/output (I/O) capability for the Mark VIe control system. It includes a number of input and output channels, which can be used to interface with various sensors, switches, and other devices used in gas turbine operation.

The board is designed to be rugged and reliable, capable of operating in the harsh industrial environment typical of gas turbine applications. It includes a number of built-in diagnostic and troubleshooting features to help technicians quickly identify and resolve any issues that may arise.

Overall, the GE DS3800HSHA printed circuit board is a critical component of the Mark VIe gas turbine control system, providing digital I/O capability for a wide range of sensors and devices used in gas turbine operation. Its rugged design and diagnostic features make it an essential part of the control system, ensuring safe and reliable operation of the gas turbine.

By April 23, 2023 0
GE DS3810CLCB1A1A Input Circuit Board Details Introduction
Industry trends

GE DS3810CLCB1A1A Input Circuit Board Details Introduction

The GE DS3810CLCB1A1A input circuit board is a component of the General Electric Speedtronic Mark VI gas turbine control system. It is responsible for providing input signal conditioning and processing for various sensors and transducers used in gas turbine operation.

The DS3810CLCB1A1A input circuit board features up to 16 channels of analog inputs, with each channel capable of accepting a range of signal types, including voltage, current, RTD, and thermocouple. The board includes a built-in microprocessor that provides advanced signal conditioning, processing, and scaling capabilities, enabling it to convert raw sensor signals into meaningful data for the control system.

The input circuit board is designed to operate within the harsh industrial environment typical of gas turbine applications. It features a ruggedized enclosure and can operate within a wide temperature range. The DS3810CLCB1A1A input circuit board also includes built-in diagnostic and troubleshooting features, including error detection and logging, to help technicians quickly identify and resolve any issues that may arise.

In summary, the GE DS3810CLCB1A1A input circuit board is a critical component of the Mark VI gas turbine control system, responsible for providing input signal conditioning and processing for various sensors and transducers used in gas turbine operation. Its advanced signal conditioning and processing capabilities, ruggedized design, and diagnostic features make it an essential part of the gas turbine control system, ensuring safe and reliable operation of the gas turbine.

By April 23, 2023 0
GE DS200TCPSG1APE Terminal Module Details Introduction
Industry trends

GE DS200TCPSG1APE Terminal Module Details Introduction

The GE DS200TCPSG1APE terminal module is a critical component of the General Electric Mark VIe gas turbine control system. As a terminal block module, it provides a connection point between the control system and the gas turbine’s sensors and actuators.

The DS200TCPSG1APE terminal module features a high-density terminal block with up to 80 input/output connections, making it suitable for use in complex control systems. It is also designed to be compatible with various communication protocols, including Ethernet, Profibus, and Modbus. This allows for seamless integration with other components of the gas turbine control system, enabling effective monitoring and control of the gas turbine’s operation.

In addition to its connectivity features, the DS200TCPSG1APE terminal module also includes built-in diagnostic and troubleshooting features. This allows technicians to quickly identify and resolve any issues that may arise, helping to ensure that the gas turbine operates safely and reliably.

The module is designed to withstand the harsh industrial environments typically found in gas turbine applications. It features a ruggedized enclosure and can operate within a wide temperature range. The DS200TCPSG1APE terminal module also includes a power supply of +24V DC and consumes 15W of power.

In summary, the GE DS200TCPSG1APE terminal module is a critical component of the Mark VIe gas turbine control system. Its high-density terminal block, compatibility with various communication protocols, and diagnostic features make it an essential part of the gas turbine control system, ensuring the safe and reliable operation of the gas turbine.

By April 23, 2023 0
GE DS200TCQAG1BHF Terminal Module Details Introduction
Industry trends

GE DS200TCQAG1BHF Terminal Module Details Introduction

The GE DS200TCQAG1BHF terminal module is a component of the General Electric Mark VIe gas turbine control system. It is responsible for providing a connection point between the control system and the gas turbine’s sensors and actuators.

The module features a high-density terminal block with up to 80 input/output connections, making it suitable for use in complex control systems. It also includes built-in diagnostic and troubleshooting features to help technicians quickly identify and resolve any issues that may arise.

The DS200TCQAG1BHF terminal module is designed to operate in harsh industrial environments, with a ruggedized enclosure and a wide operating temperature range. It is also compatible with a variety of communication protocols, including Ethernet, Profibus, and Modbus.

In summary, the GE DS200TCQAG1BHF terminal module is a critical component of the Mark VIe gas turbine control system, responsible for providing a connection point between the control system and the gas turbine’s sensors and actuators. Its high-density terminal block, diagnostic features, and compatibility with multiple communication protocols make it an essential part of the gas turbine control system.

By April 23, 2023 0
GE DS3800HXPD1B1D Input Module Specification Parameters
Industry trends

GE DS3800HXPD1B1D Input Module Specification Parameters

The GE DS3800HXPD1B1D input module is a part of the General Electric Speedtronic Mark IV gas turbine control system. It is responsible for providing digital input signals to the control system, allowing it to monitor and control various aspects of the gas turbine’s operation.

Here are some of the key specification parameters of the GE DS3800HXPD1B1D input module:

  • Input channels: 32 digital inputs
  • Input voltage range: 0 to 30 VDC
  • Input current range: 0 to 25 mA
  • Input response time: less than 1 ms
  • Isolation: 1500 VDC between field and logic sides
  • Built-in diagnostic and troubleshooting features, including error detection and logging
  • Power supply: +5V DC
  • Power consumption: 7W
  • Operating temperature range: 0°C to 70°C
  • Storage temperature range: -40°C to 85°C
  • Humidity range: 5% to 95% non-condensing
  • Dimensions: 7.25 x 9.5 x 1.25 inches (184 x 241 x 32 mm)

Note that these are just some of the key parameters, and there may be additional specifications and features depending on the specific application and configuration of the module.

The GE DS3800HXPD1B1D input module is a component of the General Electric Speedtronic Mark IV gas turbine control system. It is a digital input module that is responsible for providing signals to the control system for monitoring and controlling various aspects of the gas turbine’s operation.

The module features 32 digital input channels and can accept input signals ranging from 0 to 30 VDC, with a response time of less than 1 ms. It is designed to operate in harsh industrial environments, with built-in diagnostic and troubleshooting features to ensure reliable operation.

The DS3800HXPD1B1D input module is just one part of the comprehensive Speedtronic Mark IV control system, which also includes other modules for monitoring and controlling the gas turbine’s operation, such as the DS3800HIOA1C1E digital output module and the DS3800HPDC1A1B voltage regulator module.

In summary, the GE DS3800HXPD1B1D input module is a critical component of the Speedtronic Mark IV control system, responsible for providing digital input signals to the system for monitoring and controlling the gas turbine’s operation. Its reliable operation and diagnostic features make it an essential part of the gas turbine control system.

By April 23, 2023 0
GE DS3800NDAC1E1F Circuit Board Details Introduction
Industry trends

GE DS3800NDAC1E1F Circuit Board Details Introduction

The GE DS3800NDAC1E1F circuit board is a part of the General Electric Speedtronic Mark IV gas turbine control system. It is responsible for providing the necessary signal conditioning and processing functions for the inputs and outputs of the system. The board is a digital/analog converter (DAC) that converts the analog signals from the sensors and transmitters into digital signals that can be processed by the system’s digital controller.

The DS3800NDAC1E1F board is designed to handle a variety of input signals, including voltage, current, and resistance. It also includes a built-in power supply that can provide the necessary power to the board and other components of the system.

The board features high-speed processing capabilities and is designed to operate reliably in harsh industrial environments. It is also equipped with diagnostic and troubleshooting features to help technicians identify and resolve any issues that may arise.

In summary, the GE DS3800NDAC1E1F circuit board is a critical component of the Speedtronic Mark IV control system, responsible for converting analog signals into digital signals for processing by the system’s digital controller. Its reliable operation and diagnostic features make it an essential part of the gas turbine control system.

By April 23, 2023 0
GE Control Card IS200RAPAG1A Details Introduction
Industry trends

GE Control Card IS200RAPAG1A Details Introduction

The GE IS200RAPAG1A is a control card designed for use in industrial automation systems. It is a rugged and reliable device that offers a wide range of features and capabilities. The following is an introduction to the GE IS200RAPAG1A control card.

The GE IS200RAPAG1A control card features a compact and robust design, which makes it suitable for use in a wide range of industrial applications. It is designed to provide high-performance control and data acquisition capabilities in harsh environments, making it ideal for use in industries such as oil and gas, chemical processing, and power generation.

The control card features a range of input and output options, including digital and analog inputs, analog outputs, and relay outputs. It also includes a range of communication interfaces, including Ethernet, RS-232, and RS-485, which allows it to communicate with a wide range of devices and systems.

The GE IS200RAPAG1A control card also includes a range of advanced control features, including PID control, auto-tuning, and soft start/stop capabilities. These features enable precise and efficient control of industrial processes, resulting in improved productivity and reduced costs.

In terms of specifications, the GE IS200RAPAG1A control card supports an operating temperature range of -40°C to 70°C and has an ingress protection rating of IP20. It measures 14.0 x 21.6 x 8.6 cm (5.5 x 8.5 x 3.4 in) and weighs 1.1 kg (2.5 lb). The control card operates on 24V DC input voltage and consumes a maximum of 10 watts of power.

Overall, the GE IS200RAPAG1A control card is a versatile and reliable solution for industrial automation systems. Its advanced control features, robust design, and wide range of input and output options make it an ideal choice for a wide range of industrial applications.

By April 21, 2023 0
GE IS200EGPAG1A Communication Module Details Introduction
Industry trends

GE IS200EGPAG1A Communication Module Details Introduction

The GE IS200EGPAG1A is a communication module designed for use with GE’s PACSystems RX3i and RX7i controllers. It provides a flexible and reliable means of communication between the controllers and other devices and systems in an industrial environment.

The communication module supports a range of protocols, including Modbus TCP/IP, Ethernet/IP, and Profinet IO, making it easy to integrate with existing systems. It also features two Ethernet ports, with support for both copper and fiber optic connections, providing flexibility in network configuration.

The GE IS200EGPAG1A communication module has a compact design, with a small form factor that allows for easy installation and integration into existing control systems. It has an operating temperature range of -40°C to 60°C, making it suitable for use in a wide range of industrial environments.

The module features a plug-and-play interface, with easy configuration using GE’s Proficy Machine Edition software. It also supports redundancy and fault tolerance, with the ability to configure a backup communication path for increased reliability.

Overall, the GE IS200EGPAG1A communication module is a versatile and reliable solution for communicating with other devices and systems in an industrial environment. Its flexibility, ease of use, and support for multiple protocols make it an ideal choice for a wide range of industrial applications.

By April 21, 2023 0
GE IS200ERGTH1A I/O Module Specification Parameters
Industry trends

GE IS200ERGTH1A I/O Module Specification Parameters

Here are the specification parameters for the GE IS200ERGTH1A input and output (I/O) module:

  1. Input/Output (I/O) Architecture: The module has a flexible I/O architecture with support for a wide range of analog and digital inputs and outputs.
  2. Analog Inputs: The module supports up to 8 analog inputs, with a range of -10V to +10V or 0V to +10V, and a resolution of 16 bits.
  3. Analog Outputs: The module supports up to 4 analog outputs, with a range of -10V to +10V or 0V to +10V, and a resolution of 16 bits.
  4. Digital Inputs: The module supports up to 32 digital inputs, with a voltage range of 5V to 24V DC and a current rating of 7 mA.
  5. Digital Outputs: The module supports up to 32 digital outputs, with a voltage range of 5V to 24V DC and a current rating of 0.5 A.
  6. Operating Temperature: The module is designed to operate in a wide temperature range of -40°C to 70°C, making it suitable for use in harsh industrial environments.
  7. Ingress Protection: The module is designed to provide protection against dust and water ingress, with an IP30 rating.
  8. Safety Features: The module has integrated safety features, such as fail-safe modes and emergency shutdown capabilities, ensuring safe and reliable operation.
  9. Compatibility: The module is compatible with the RX3i and RX7i PACSystems families of controllers by GE.
  10. Communication Protocols: The module supports a range of communication protocols, including Ethernet/IP, Modbus TCP, and Profibus DP.
  11. Power Consumption: The module has a power consumption of 2 watts.
  12. Dimensions: The module measures 11.0 cm x 19.1 cm x 8.2 cm (4.3 in x 7.5 in x 3.2 in) and weighs 0.45 kg (1.0 lb).

Overall, the GE IS200ERGTH1A I/O module is a reliable and high-performance solution for controlling and monitoring industrial processes. Its flexible I/O architecture, advanced processing capabilities, and integrated safety features make it an ideal choice for a wide range of industrial applications.

By April 21, 2023 0
  • Shop by category
Main Menu
Back to Top

Search For Products

Popular searches
Product has been added to your cart