3ADT313900R1501 SDCS-CON-4 sensor system module card

3ADT313900R1501 SDCS-CON-4 sensor system module card

Technical data of product parameters

There are 3ADT313900R1501 SDCS-CON-4 some points about power distribution that you should be aware of.
First, the master control relay must be able to inhibit all machine motion by
removing power to the machine I/O devices when the relay is de-energized.
Second, if you are using a dc power supply, interrupt the load side rather than
the ac line power. This avoids the additional delay of power supply turn-on and
turn-off. The dc power supply should be powered directly from the fused
secondary of the transformer. Power to the dc input and output circuits is
connected through a set of master control relay contactsout, it no longer provides any safety protection. These switches should be 3ADT313900R1501 SDCS-CON-4
tested periodically to assure they will stop machine motion when needed.The printed circuit boards of the controller must be protected from dirt, oil,
moisture and other airborne contaminants. To protect these boards, the
controller must be installed in an enclosure suitable for the environment. The
interior of the enclosure should be kept clean and the enclosure door should
be kept closed whenever possible.
Regularly inspect your terminal connections for tightness. Loose connections
may cause improper functioning of the controller or damage the components
of the systemThis position places the processor in the Run mode. The processor 3ADT313900R1501 SDCS-CON-4
scans/executes the ladder program, monitors input devices, energizes
output devices, and acts on enabled I/O forces. You can only change
the processor mode by changing the keyswitch position. You cannot
perform online program editing.
To change the processor mode to Run, toggle the keyswitch from
PROG or REM to RUN. When the keyswitch is left in the RUN
position, you cannot use a programmer/operator interface device to
change the processor mode.This position places the processor in the Program mode. The
processor does not scan/execute the ladder program, and the
controller outputs are de-energized. You can perform online program
editing. You can only change the processor mode by changing the
keyswitch position.
To change the processor mode to Program, toggle the keyswitch from
REM or RUN to PROG. When the keyswitch is left in the PROG
position, you cannot use a programmer/operator interface device to
change the processor mode

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com