3HAB6914-1 DSQC ABB module

3HAB6914-1 DSQC ABB module

Technical data of product parameters

Protect the servo amplifier from impermissible stresses. In particular, do not let any components become bent or any insulation distances altered during transport and handling. 3HAB6914-1 DSQC ABB module with electronic components and contacts.

Check the combination of servo amplifier and motor ( p.72). Compare the rated voltage
and current of the units. Carry out the wiring according to the instructions on Page 26.

Make sure that the maximum permissible rated voltage at the terminals fo3HAB6914-1 DSQC ABB module, even in the most unfavourable conditions
(see EN 60204-1 Section 4.3.1). An excessive voltage on these terminals can lead to destruction of the regen circuit and the servo amplifier.
Use the SERVOSTAR 44x only on an earthed 3-phase supply system. Use the amplifier only
to drive a synchronous servomotor.

The fusing of the AC supply input and the 24V supply is installed by the user 3HAB6914-1 DSQC ABB module

Take care that the servo amplifier and motor are properly earthed. Do not use painted
(non-conductive) mounting plates.

Route power and control cables separately. We recommend a separation of at least 20 cm.
This improves the interference immunity required by EMC regulations. If a motor power cable is used which includes cores for brake control, the brake control cores must be separately shielded.
Earth the shielding at both ends ( p.28).

Install all heavy-current cables with an adequate cross-section, as per 3HAB6914-1 DSQC ABB module

Wire the BTB/RTO contact in series into the safety circuit of the installation.
Only in this way is the monitoring of the servo amplifier assured.

Install all shielding with large area (low impedance) connections, with metallised connector
housings or shield connection clamps where possible.
Notes on connection techniques can be found on Page 32 and the Application Note “Cables
& Connectors”.

Ensure that there is an adequate flow of cool, filtered air into the bottom of the switchgear

Product picture display

Company advantages

Warranty: Seven day acceptance period, one year warranty period

Delivery period: 1-3 working days

Advantages: supply of imported genuine products, professional off production accessories, fast delivery and accurate delivery

Main products: Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

Main brands:

ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

reminder

For more products, please contact the email for inquiry 1849076084@qq.com

This article is from  https://www.onewwww.com/