AB 842E-CM-MIP3BA encoder

AB 842E-CM-MIP3BA encoder

Technical data of product parameters

The 842E-CM-MIP3BAmodules is either via the cable plug on the front side
or via the connection already integrated in the I/O busboard (for (Ex)i modules and partly analog input modules).
L- is also taken from the plug-in power distribution unit to be connected to
the potential distributor XG. 11 (at least two times, if 2-pole connected output modules are used with up to 4 feeding lines). So all power distribution
modules F 7133 are internal connected with L-. Via the front side of the
power distribution modules the L- is also fed to the input/output modules
via the cable plugs.
The circuit feeding the sensors is 842E-CM-MIP3BA fused by the front of the F 7133 module.
It is advisable to supply the input module and the appertaining sensors via
the same circuit of the power distribution module F 7133.If the power requirements of the 5 V circuits is > 18 A an additional power
supply has to be used. For this purpose the B 9361 assembly kit can be
used which provides the possibility of applying three 24 V/5 V power supplies F 7126 together with the monitoring module F 7131 in an additional
subrack.
The 5 V output circuits of the additional power supply must not be switched
in parallel with the ones from the central rack. Apart from them they supply
their own circuits. The reference poles GND have to be connected together.
The power supply units of the additional power supply (assembly kit
B 9361) emit monitoring signals. These signals can be taken from the XG1
terminal block on the rear side of the subrack (see B 9361 assembly kit).
They can be fed into the PLC via digital input modules. In the logic of the
PLC the signals are used to trigger an error message.With the I/O subrack, the connection elements for the I/O bus are the 842E-CM-MIP3BA
F 7553 coupling module plugged into slot 17. The connection of the I/O
bus between the individual I/O module subracks is established at the rear
side via the BV 7032 data cable which is connected to the plugs XD. 1 and
XD. 2. The I/O bus in the I/O module subracks is integrated in the bus
board.The I/O modules are used for signal transfer and signal matching between
the plant and the central devices. The input and output circuits are always
fed into the I/O modules via cable plugs on the front side. The status of the
digital signals is shown on the LEDs of the cable plugs. The power supply
is either via the cable plugs or via the I/O bus board. The order of the different I/O module types does not matter.

Product picture display

bout us service idea

Since its inception, the company has always insisted on pure e-commerce mode of operation, reducing the intermediate links, for customers in the first time to provide quality products and satisfactory service, for your production and procurement work to provide ‘safe, fast and convenient’ the company has a sound logistics supply system, has established a good partnership with many well-known foreign brand manufacturers.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com