ABB 3BHE039203R0101 5SXE12-0184 GVC736CE101 robot spare parts
Technical data of product parameters
DMA interrupt enable bits in the 3BHE039203R0101 5SXE12-0184 GVC736CE101 should also be enabled as necessary. In Step 2, get the RFM PCI address from Mailbox 2 register at $350. Add this address to the RFM Offset address. In Step 3, the actual transfer is programmed into the DMA: source and destination start addresses into the DLA and DVA registers, transfer count into the DTBC register, and transfer width, direction and VMEbus address space into the DCTL register. These should be 3BHE039203R0101 5SXE12-0184 GVC736CE101reprogrammed after each transfer. In Step 4, ensure that if any status bits (DONE, STOP, HALT, LERR, VERR, or P_ERR) remain set from a previous transfer they are cleared. P_ERR must not be updated at the same time as Step 5, otherwise the P_ERR that may be generated by setting GO may be missed (see Step 5). These bits may be cleared as part of Step 1. In Step 5, with the transfer programmed, the GO bit in DGCS must be set. If the DMA has been improperly programmed, either because the BM bit in the PCI_CSR has not been set to enable PCI bus mastership, or the source and destination start addresses are not aligned, then3BHE039203R0101 5SXE12-0184 GVC736CE101 will be asserted. Otherwise, the ACT bit will be set, and the DMA will then start transferring data, sharing ownership of the VMEbus with the PCI Target and Interrupt channels and the PCI bus with the VMEbus Slave Channel. In Step 6, one waits for termination of the DMA transfers. The DMA will continue with the transfers until it: • completes all transfers, • is terminated early with the 3BHE039203R0101 5SXE12-0184 GVC736CE101 bit, or • encounters an error on the PCI bus or VMEbus. Each of these conditions will cause the ACT bit to clear, and a corresponding status bit to be set in the DGCS register. If enabled in Step 1, an interrupt will also be generated. Once the software has set the GO bit, the software can monitor for DMA completion by either waiting for generation of an interrupt, or by polling the status bits. It is recommended that a background timer also be initiated to time-out the transfer. This will ensure that the DMA has not been hung up by a busy VMEbus, or other such system issues. If an early termination is desired, perhaps because a higher priority operation is required, the STOP_REQ bit in the DGCS register can be set
Product picture display
About us
Ruichang Mingsheng Automation Equipment Co., Ltd. is an enterprise specializing in the sales of ABB DSQC robot system module spare parts and Siemens Moore APACS control system spare parts for a long time. The spare parts we sell all provide a one-year quality assurance, and have undergone strict testing and certification. Our company can directly purchase from overseas, and can provide equipment and spare parts from different countries and manufacturers Solve the problems you are looking for in many places or worry about product quality problems, etc. We have great advantages in price, product details, and sincerely welcome you to call or use E-mail to query!
Email: onewwww@foxmail.com
Introduction to main products
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules/cards, controllers, touch screens, servo drives.
Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,
Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands
reminder
For more products, please contact the email for inquiry onewwww@foxmail.com
This article from the temporal Ming sheng automation equipment co., LTD.,
link: http:www.onewwww.com
Reviews
There are no reviews yet.