ABB 5SHX1445H0001 3BHL00391P0101 control system DCS module

ABB 5SHX1445H0001 3BHL00391P0101 control system DCS module

Technical data of product parameters

 Note that Bit 27 of the5SHX1445H0001 3BHL00391P0101 must be set high before parity is active. Also note that parity works only on Lword and Qword accesses. Word (16-bit) and byte (8-bit) memory write access are inhibited. Bit 12: Mem. Write Inhibited – When this bit is high (1), a 16-bit word or an 8-bit byte write to local memory was attempted and inhibited while the board was in the parity enabled mode. This bit is latched. Once set, it must be cleared by writing a zero to this bit location. 5SHX1445H0001 3BHL00391P0101 Latched Sync Loss – When this bit is high (1), the receiver circuit has lost synchronization with the incoming signal one or more times. This bit is latched. Once set, it must be cleared by writing a zero to this bit location. The assertion of the Latched Sync Loss usually indicates the receiver link was or is disconnected, either intentionally or unintentionally, and data may have been lost. This event will also occur if the upstream node tied to the receiver is powered off or is disabled. Bit 10: RX FIFO Full – When this bit is high (1), the 5SHX1445H0001 3BHL00391P0101 has been full one or more times. This bit is latched. Once set, it must be cleared by writing a zero to this bit location. This is a fault condition and data may have been lost. Bit 09: RX FIFO Almost Full – When this bit is high (1), the 5SHX1445H0001 3BHL00391P0101has been almost full one or more times. This bit is latched. Once set, it must be cleared by writing a zero to this bit location.The assertion of the RX FIFO Almost Full bit indicates the receiver circuit is operating at maximum capacity and, under normal operating conditions, this event should not occur. If it does occur, the PCI bus master should tempoINT4 – When this bit is high (1), one or more type 4 network interrupts have been received. To see the sender data and sender node ID(s), read the Interrupt Sender Data 4 (ISD4)5SHX1445H0001 3BHL00391P0101 at offset $38 and the Interrupt Sender ID (SID4) FIFO at offset $3C respectively. Bit 06: Rogue Packet Fault – When this bit is set high (1), the board is operating as Rogue Master 0 or 1 and has detected and removed a rogue packet

Product picture display

About us 

Ruichang Mingsheng Automation Equipment Co., Ltd. is an enterprise specializing in the sales of ABB DSQC robot system module spare parts and Siemens Moore APACS control system spare parts for a long time. The spare parts we sell all provide a one-year quality assurance, and have undergone strict testing and certification. Our company can directly purchase from overseas, and can provide equipment and spare parts from different countries and manufacturers Solve the problems you are looking for in many places or worry about product quality problems, etc. We have great advantages in price, product details, and sincerely welcome you to call or use E-mail to query!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com