ABB AC10272001R0101 5SXE10-0181 5SHY35L4520 original new stock

ABB AC10272001R0101 5SXE10-0181 5SHY35L4520 original new stock

Technical data of product parameters

This bit selects the auto or manual mode for the printer strobe.
When this bit is low, the printer strobe is generated by a write to AC10272001R0101 5SXE10-0181 5SHY35L4520
the printer data register (auto mode). When this bit is high, the
printer strobe is not generated by a write to the printer data
register (manual mode). This bit is cleared by reset.
Bit 1 This bit controls the printer strobe timing in the auto mode.
When this bit is low, the strobe time in the auto mode is AC10272001R0101 5SXE10-0181 5SHY35L4520
microseconds. When this bit is high, the strobe time in the auto
mode is 8 microseconds. The strobe time is also the time delay
from the write to the printer data register to the assertion of the
printer strobe. This bit is cleared by reset. These bits program the interrupt level the DMA controller
generates. Level 0 does not generate an interrupt. These bits are
cleared by reset. Bit 3 When this bit is high, the interrupt is enabled. The interrupt is
disabled when this bit is low. This bit is cleared by reset.
Bit 7 When this bit is high, a DMA interrupt is being generated at the
level programmed in bits 0-2. This bit is edge sensitive and it is
set on the leading edge of interrupt enable and DMA DONE (in
DMA Control and Status Register). This bit is cleared when a 1
is written to it or when the interrupt is disabled. When cleared,
it remains cleared until the next leading edge of interrupt enable
and DMA DONE. This bit is cleared by reset. When this bit is low, the DMA controller is disabled and status AC10272001R0101 5SXE10-0181 5SHY35L4520
bits 3-7 are reset. When this bit is high, the DMA controller is
enabled. Bit 1 This bit controls the mode of the DMA controller. When this bit
is low, the DMA controller uses the address and byte count in
the address and byte count registers. When this bit is high, the
DMA controller uses address and byte counts in a table pointed
to by the table address register.
Bit 2 This bit controls the direction the data is transferred. When this
bit is low, the DMA controller transfers data from the SCSI bus.
When this bit is high, the DMA controller transfers data to the
SCSI bus.

Product picture display

About us 

Ruichang Mingsheng Automation Equipment Co., Ltd. is an enterprise specializing in the sales of ABB DSQC robot system module spare parts and Siemens Moore APACS control system spare parts for a long time. The spare parts we sell all provide a one-year quality assurance, and have undergone strict testing and certification. Our company can directly purchase from overseas, and can provide equipment and spare parts from different countries and manufacturers Solve the problems you are looking for in many places or worry about product quality problems, etc. We have great advantages in price, product details, and sincerely welcome you to call or use E-mail to query!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com