ABB UNITROL 1010 3BHE035301R1002 UNS 0121A-Z, V1 UN1010-0001 stock

ABB UNITROL 1010 3BHE035301R1002 UNS 0121A-Z, V1 UN1010-0001 stock

Technical data of product parameters

All the safety UNITROL 1010 3BHE035301R1002 UNS 0121A-Z, V1 UN1010-0001related output modules fulfill the requirements of the requirement class 6 without time limit in case of a fault of an output module.
The safety related output modules have 3 semiconductors switched in series. That means that more than the required second independent component for safe shut down is now integrated in the output module. In the
following this feature is called the integrated safety shut down. The data
sheets of this output modules contain the sign . If a new safety related output module should fail during operation then it will be automatically
switched off with the integrated safety shut down to get the safe deenergized status.
The coupling module F 7553 which has to be installed in each I/O subrack
is able to switch off the watch dog signal (WD) of the I/O subrack. Even in
case of a very seldom second fault only the related I/O subrack will be
switched off but not the entire system. The positive pole is usable also for power voltage and control voltage. To UNITROL 1010 3BHE035301R1002 UNS 0121A-Z, V1 UN1010-0001
achieve the valid values for the connection of single phase mains supplies,
power supply units with bridge rectification and smoothing are required or
stabilized power supply units. With using of HIMA standard power supplies, the potential L+ met the requirements according to the NAMUR standard NE 21 to compensate voltage dips up to 20 ms per second.
The central devices of the family H51q have decoupling and buffering during voltage dips. Disturbances within the I/O level will be suppressed by
the noise blanking.If an existing H51 system is changed in a H51q system and I/O racks out UNITROL 1010 3BHE035301R1002 UNS 0121A-Z, V1 UN1010-0001
of the assembly kit are still part of the system it could be extend always
with I/O racks out of the assemly kit B 9302. This extensions are covered
through the TÜV certificate of the Bavarian TÜV. The control in operation
is protected for continued existence also after the end of the certificateThe using of this modules also of the testable modules like F 3313, F 3314
and F 3323 is not admissible for safety related outputs! Because of the
new designed realization of the shut down in the B 9302 assembly kit the
supply voltage of an old output module can not be switched off automatically in case of a defective central module and so the outputs of the corresponding module can not be reset independent from the CPU.

Product picture display

bout us service idea

Since its inception, the company has always insisted on pure e-commerce mode of operation, reducing the intermediate links, for customers in the first time to provide quality products and satisfactory service, for your production and procurement work to provide ‘safe, fast and convenient’ the company has a sound logistics supply system, has established a good partnership with many well-known foreign brand manufacturers.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com