BZM01.3-01-07 Fiber Optic Interface Board

BZM01.3-01-07 Fiber Optic Interface Board

Technical data of product parameters

The BZM01.3-01-07 is an auxiliary bleeder module from Bosch Rexroth. The product is one of the several BZM series of such servo drives from the manufacturer. It can be used along with the ZKS DC bus internal dynamic brake from the manufacturer. The unit has a power rating of 1kW. The drive weighs approximately 7kg. The module features a voltage category code of 07 and it supports both single-phase and three-phase connection for purpose of protection. You can get this auxiliary bleeder module with a warranty period of one year from Wake Industrial.
The rated current of this device is 40A. It is designed for installation inside the control cabinet. When multiple relief modules and DKC drive controllers are connected, the continuous regenerative power output and regenerative power accumulation in the shared DC bus are uniformly distributed to all relief components. The maximum discharge power of this product is 120kW. The X1 connector is a spring-loaded contact with 2 x 4 pins and a sleeve. It supports the connection of wires with a cross-sectional area of 24-16AWG.
The auxiliary module will not function if there is a control voltage failure. The unit has a series code of 1 and a version code of 3. The device has a voltage rating of 480VAC/700VDC. It features a Bb contact that helps to determine if the bleeder is ready for power application. The contact has a minimum contact load of 10mA, a maximum switching current of 1ADC and a maximum switching voltage of 40VDC. The product is CE Certified. The product encompasses a reset key. The device also comprises both digital and analog inputs and outputs. The BZM01.3-01-07 can be shipped to the address of your preference through our several trustworthy delivery partners.

Product picture display