GE DS200ADGIH1AAA servo controller servo motor servo driver warehouse stock

GE DS200ADGIH1AAA servo controller servo motor servo driver warehouse stock

Technical data of product parameters

When you need I/O modules arranged in dual redundant formations, each pair DS200ADGIH1AAA
of modules shares a dual termination assembly and occupies two-thirds of an
I/O base unit. The termination assemblies can bridge adjacent I/O base units,
so two base units will hold three pairs of dual redundant module
configurations, while three base units will hold four pairs. Arrange base units
in groups of two or four to optimize capacity for dual redundant modules.
If you assemble base units in groups of two or four, a single controller supports
24 pairs of I/O modules. The capacity using for example eight pairs of 16-
channel input modules and sixteen pairs of output modules is 256 I/O channels DS200ADGIH1AAA.
The capacity using 8-channel modules in dual configurations (24 pairs)channels. This can, for example, be 64 digital inputs, 64 analogue
inputs and 64 digital outputs, or any combination of these values with a
granularity of eight, the capacity of one I/O module.When you need input modules arranged in triple modular redundant
formations, each group of three modules will share a single triple termination
assembly and occupies all of an I/O base unit. A single controller supports 16
groups of three modules, so a hypothetical controller using 16-channel input
modules and needing no output channels will have a capacity of 16 x 16 = DS200ADGIH1AAA
input channels.
A solution using 8-channel modules and needing dual output modules as well
as triplicated input modules will, with a ratio of 2:1 of inputs to outputs, supply
96 input channels and 48 output channels. These capacities are derived like
this:You can identify a new controller to have the correct quantity of I/O channels
that you need and also configure spare I/O channels that you anticipate you
could need in the future. Having done this, it is straightforward to add more
T9300 I/O base units and modules when you expand the controller.
However, if you haven’t configured spare slots for new hardware you can stillexpand your system. You can install the new hardware and change thecontroller hardware configuration in the AADvance Workbench and load thechanged application.The AADvance controller modular design makes it easy to create and changeDS200ADGIH1AAAthe I/O configuration. The on-line update facility enables you to make changesto the I/O configuration after the system is commissioned

Product picture display

Related products：

Kollmorgen S403BA-CA input and output module

Kollmorgen S443M-SE Control Pulse Card Module

KollmorgenS443M-PB Digital Input Module