GE DS200TCCBG1ALC Digital Input Card

GE  DS200TCCBG1ALC Digital Input Card

Product Details Introduction

The GE DS200TCCBG1ALC is a digital input card that is used in industrial control systems and process automation applications. It is designed to interface with various digital sensors and devices to monitor and control inputs within a system.

Here are some key details about the GE DS200TCCBG1ALC digital input card:

1. Function: The DS200TCCBG1ALC card serves as an interface between the control system and the external digital devices. It receives digital input signals from various sources and transmits them to the central control system for processing and decision-making.
2. Compatibility: This card is specifically designed for use in GE’s control system platforms, such as the Mark VIe, Mark V, and other similar systems. It is important to ensure compatibility with the specific control system before installing or using the card.
3. Inputs: The DS200TCCBG1ALC card typically provides a certain number of digital input channels, depending on the configuration. Each input channel can accept a digital signal from a connected device, such as a proximity switch, limit switch, or any other compatible digital sensor. The card processes these input signals and provides the corresponding data to the control system.
4. Communication: The card communicates with the control system using a digital communication protocol, typically over a backplane or a communication bus. The exact protocol used may depend on the specific control system and its requirements.
5. Redundancy: In many industrial applications, redundancy is crucial to ensure system reliability. The DS200TCCBG1ALC card may support redundancy features, such as dual-card configuration or redundant communication paths, to provide backup and failover capabilities in case of a single point of failure.
6. Diagnostics and Monitoring: The card often incorporates diagnostic features that allow for monitoring the status of the digital inputs and the overall health of the card. These diagnostics can help in identifying faults or issues with the connected devices and ensure proper functioning of the system.
7. Installation and Configuration: The DS200TCCBG1ALC card is typically installed in a dedicated slot within the control system’s rack or chassis. Proper installation and configuration procedures should be followed as per the manufacturer’s guidelines and documentation.

Product picture display

Related products：

GE IS200AEPCH1BAA Acoustic Monitoring Terminal Board

GE VMIVME-2128 output module

GE IS220PSVOH1A General Electric Module