GE DS3800DFXD1B1B Driver

GE DS3800DFXD1B1B Driver

Technical data of product parameters

DS3800DFXD1B1B and DS3800DFXB1B1B are regulator boards in the Mark IV Speedtronic turbine control system [1]. The former is a densely populated circuit board with multiple codes printed on its edges, close to drilled holes, making it easy to install the circuit board into the entire system. It uses through hole components installed on the top of the circuit board, including resistors, diodes, capacitors, multiple integrated circuits, transistors, and three test points [1]. The board has seven jumper switches and a potentiometer that allows variable settings. Jumpers can be changed to change individual circuits [1]. The board has three right angle connectors, one of which has a provided ribbon connector [1].
On the other hand, the DS3800DFXB1B1B is a small rectangular plate, and the ribbon harness is connected to its front edge [0]. The board has almost no other components, but it includes three resistor network arrays, several capacitors, and three EEPROMs. There are also several PTH (plated through holes) on the surface of the board, and if necessary, other components can be installed [0]. Each corner of the circuit board is drilled for easy installation. The code on the surface of the circuit board helps to determine the correct wiring and circuit board position. The board weighs approximately 0.14 pounds [0].
The voltage regulator boards such as DS3800DFXD1B1B and DS3800DFXB1B1B are designed to provide fixed outputs regardless of changes in load or input voltage. They eliminate peaks or valleys to maintain smooth operation. The Mark IV Speedtronic system is a modular system that uses various circuit boards and aims to provide the same reliable service for industrial turbine systems of different sizes and complexities

Product picture display

Related products：

GE 369HIRMFEHE module off the shelf

GE 8811-IO-DC 8811-IO-DC-01 I/O Module

GE D20 EME 10BASE-T module