GE IC698CPE040 CPU

GE IC698CPE040 CPU

Technical data of product parameters

The components are packed to make IC698CPE040 sure they arrive undamaged and ready
for assembly. Nevertheless, you should inspect all modules before beginning
the assembly work.
On receipt, carefully inspect all the shipping cartons for damage.
• If any cartons are damaged, note the damage on the carrier’s shipping
document before signing it. Save any damaged cartons for inspection by
the carrier.
• If any part of the delivered components has been damaged during
shipping, notify the carrier and Rockwell Automation immediately.
Damaged goods must be returned Rockwell Automation for repair or
replacement (see Warranty and Returns instructions with delivery
documentation)Handling Modules Stored at Extreme Temperatures:
It is recommended that modules removed from storage should be
allowed to normalize their temperature before installation. This is IC698CPE040
particularly important when modules have been stored at very low
temperatures where condensation can occur. Remove the modules
and place them in an upright position and wipe away any
condensation that might appear on the modules.
Failure to follow these recommendations could lead to damage to
modules or incorrect operation when installed into a running system.RS485fd: A four-wire full duplex connection that features different
busses for transmit and receive. This selection must also be used when
the controller is acting as a MODBUS Master using the optional fourwire definition specified in Section 3.3.3 of the MODBUS-over-serial
standard. IC698CPE040
• RS485fdmux: A four-wire full-duplex connection with tri-state outputs
on the transmit connections. This must be used when the controller is
acting as a MODBUS Slave on a four-wire bus.
• RS485hdmux: A two-wire half duplex connection applicable for master
slave or slave use. This is shown in the MODBUS-over-serial standard.
Each processor uses the two serial ports above it on the baseplate. Data is not
mirrored between ports. Therefore a single processor system has two ports
available, a dual processor system has four ports and a triple processor system
has six ports available to it.
Connect the serial communications cabling to the six plugs labeled S1-1
through S3-2 on the T9100 processor base unit

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com