CP435T 1SBP260193R1001 module automation industrial control spare parts
Technical data of product parameters
Mount the baseplates using 8-32 x 1/2 inch or 4 x 12mm size screws. Always use good CP435T 1SBP260193R1001
quality (corrosion resistant) mounting hardware. We recommend using star lock washers
and flat washers under the screw heads (star lock washer should be located between screw
head and flat washer) to ensure a tight baseplate ground connection, and to keep the screws
from loosening. Connect each baseplate ground wire as shown in the “Baseplate Safety
Ground” section of this chapter.
8. If you have Expansion or Remote racks, determine the correct rack number for each one, CP435T 1SBP260193R1001
then set the rack numbers using the Rack Number Selection DIP switch on the baseplate.
Please refer to the “Baseplates” chapter for details on setting these DIP switches. Rack
numbers should be assigned by the system programmer because they correspond to system
configuration settings and program memory addressing.If you have more than one baseplate (rack), interconnect the baseplates with I/O Bus
Expansion Cables. These connect between the I/O Bus Expansion Connectors, which are
located on the right end of the baseplates. These cables are connected in a “daisy-chain”
arrangement from one baseplate to the other. This is made possible by the fact that the
cables have a dual connector on one end. Therefore, when the cable is plugged into an I/O
Bus Expansion connector, the second connector on that end of the cable provides a socket
for connecting to the next cable. The data sheet for the I/O Bus Expansion cables CP435T 1SBP260193R1001
(IC693CBL300 etc.) in Appendix C has sample wiring figures.
10. On the last I/O Bus Expansion Connector, plug in an I/O Bus Expansion Terminator,
Catalog Number IC693ACC307 (unless using a cable with built-in terminator resistors,
which would either be GE Fanuc cable IC693CBL302, IC693CBL314, or your own
custom-built cable with built–in resistors).
11. Install the modules in their correct slots using your system layout drawings. (The label on
the side of each module identifies the module type and catalog number.) Refer to the
section “Installing Modules” if you are not familiar with how to do this.
12. Connect cables to Option modules. Route cables away from noise-producing wires. See
the ”Wire Routing” section of this chapter.
Product picture display
About us
Ruichang Mingsheng Automation Equipment Co., Ltd. is an enterprise specializing in the sales of ABB DSQC robot system module spare parts and Siemens Moore APACS control system spare parts for a long time. The spare parts we sell all provide a one-year quality assurance, and have undergone strict testing and certification. Our company can directly purchase from overseas, and can provide equipment and spare parts from different countries and manufacturers Solve the problems you are looking for in many places or worry about product quality problems, etc. We have great advantages in price, product details, and sincerely welcome you to call or use E-mail to query!
Email: onewwww@foxmail.com
Introduction to main products
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules/cards, controllers, touch screens, servo drives.
Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,
Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands
reminder
For more products, please contact the email for inquiry onewwww@foxmail.com
This article from the temporal Ming sheng automation equipment co., LTD.,
link: http:www.onewwww.com
Reviews
There are no reviews yet.