Honeywell spare parts 05701-A-0511

Honeywell spare parts 05701-A-0511

Technical data of product parameters

The Modbus broadcast mode is supported by the Modbus Master. The Modbus broadcast is 05701-A-0511
an unacknowledged write data message sent from the Master using Slave ID 0. All Slaves on
the communications link that support broadcast messages will process the message. As the
data transfer is one way only, broadcast messages are restricted to coil and holding register
writes only. A broadcast sequence can consist of any number of messages, each of which
may be individually enabled or disabled from the application. Each broadcast message
counts towards the maximum number of Slave messages allowed for the CI.Broadcast mode can be individually enabled for any Master device. Select ‘Use Broadcast 05701-A-0511
Mode’ to enable broadcast messages.
If message control is required (see the modes of operation below), select ‘Use Control
Variable’ and enter the Modbus address of an application variable that will be used to
control the message. Where a control register is defined for either a broadcast or Slave
message, the message is enabled when the register contains a zero value. All other values
will result in the message being disabled. The data type used for control variable can be 05701-A-0511
either Boolean or integer but not real• One Shot: In this mode a single broadcast sequence is sent when an edge is detected
on the control variable within the application. Once all enabled broadcast messages
have been sent, the mode will be suspended until a new edge is seen on the control
variable.
• Message Count: The broadcast sequence is sent after a fixed number of Slave
messages have been sent. The number of messages is set in the configuration
(‘Every xxx messages’) and cannot be changed by the application at run time. All
messages sent to the Slaves are counted. Note that messages which have been
configured but are disabled by the application will not be counted as sent messages.
Once the required number of Slave messages has been sent, the broadcast sequence
will commence. The control variable may be configured to enable and disable the
broadcast mode if required.

Product picture display

About us 

Ruichang Mingsheng Automation Equipment Co., Ltd. is an enterprise specializing in the sales of ABB DSQC robot system module spare parts and Siemens Moore APACS control system spare parts for a long time. The spare parts we sell all provide a one-year quality assurance, and have undergone strict testing and certification. Our company can directly purchase from overseas, and can provide equipment and spare parts from different countries and manufacturers Solve the problems you are looking for in many places or worry about product quality problems, etc. We have great advantages in price, product details, and sincerely welcome you to call or use E-mail to query!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com