MOX12-P3509 80026-173-23 ABSOPULSE power module

MOX12-P3509 80026-173-23 ABSOPULSE power module

Technical data of product parameters

There are twoMOX12-P3509 80026-173-23 of wiring field devices to the Contact Input Module
termination block, as shown in Figure 8-2. Each field contact may have a separate
input and return line as shown for channel 1. Alternatively, field contacts wired to
the same Contact Input Module may share a return line as shown for channels 2 and
3. For either wiring method, do not tie the contact return line to earth ground or a
ground fault condition will occur as well as a degradation of the common mode MOX12-P3509 80026-173-23
surge protection.
Debouncing of a contact input signal is done by an RC filter and digital debouncer
on the logic side. If a contact changes state for less than 3 msec, the change of state
will always be rejected. If the Contact changes state for more than 7 msec, the
change of state will always be accepted.
Ground fault detection circuitry on a Contact Input Module activates when an input
or return line for any channel finds a low impedance (<5 K ohms) path to earth MOX12-P3509 80026-173-23
ground. A single ground fault wire will not cause an error in the point data, but
multiple ground faults (if they include input and return lines) could cause faulty data
(that is, channels appearing as if contacts are closed when they are really open).
When a ground fault occurs, the external error LED lights, and the GND Fault bit
in the Status Register (Section 8-7) is set. If the GND Fault Attention Enable bit is MOX12-P3509 80026-173-23
set in the Configuration Register (Section 8-7), a ground fault is seen as a
catastrophic error causing an attention status to be sent back to the Controller. See
Figure 8-2 for ground fault detection circuitry. The Contact Input Module is
applicable for CE Mark Certified Systems.

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com