P026MX spare CPU module PLC controller

Status: In Stock

Warranty: Seven day acceptance period, one year warranty period

Delivery period: 1-3 working days

Advantages: supply of imported genuine products, professional off production accessories, fast delivery and accurate delivery

Main products: Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

Model :P026MX

P026MX spare CPU module PLC controller

Technical data of product parameters

The Valve Positioner has the ability to read and convert the coil drive D/A convertor
output signal that drives the valve. If the value readback (converted by the A/D FBM204 P0914SY
converter) and the value that was output do not match within a deadband, and for a
pre-defined period of time, a severe fatal error is assumed. In this case, the Valve
Positioner is “flying blind.” It cannot confidently determine valve position or
control the output. The Valve Positioner will remove drive power (dive) from the
entire Electronics module’s FVP field card and go through a reset sequence. The FBM204 P0914SY
coil drive D/A convertor readback check is a diagnostic that runs continuouslyAn open coil is detected by measuring voltage across the current limiting resistors
on the servo output. When zero volts are detected, either the coil is open, the servo
output is at zero, or the mechanical bias on the servo valve is incorrect. When an
error condition is detected, an internal “open” bit is set.
Typically, the servo coil voltage is -200 mV when the valve is in a stable, controlled
position and the servo valve mechanical bias is properly adjusted. If the servo output FBM204 P0914SY
amplifier voltage amplitude falls below 100 mV, the internal bit is cleared, as though
no error condition exists. If servo output voltage is greater than 100 mV, the
difference between servo output voltage and coil voltage is compared to 50 mV, and
if it is less, the ‘open’ bit is set.


Product picture display

P026MX spare CPU module PLC controller


About us 

Ruichang Mingsheng Automation Equipment Co., Ltd. is an enterprise specializing in the sales of ABB DSQC robot system module spare parts and Siemens Moore APACS control system spare parts for a long time. The spare parts we sell all provide a one-year quality assurance, and have undergone strict testing and certification. Our company can directly purchase from overseas, and can provide equipment and spare parts from different countries and manufacturers Solve the problems you are looking for in many places or worry about product quality problems, etc. We have great advantages in price, product details, and sincerely welcome you to call or use E-mail to query!

Email: onewwww@foxmail.com


Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands


reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com

P026MX spare CPU module PLC controller1

    Reviews

    There are no reviews yet.

    Be the first to review “P026MX spare CPU module PLC controller”

    Your email address will not be published. Required fields are marked *

    Back to Top
    Product has been added to your cart