PLC controller card 3BSE028586R1 module ABB Switzerland

PLC controller card 3BSE028586R1 module ABB Switzerland

Technical data of product parameters

Use the MOTIONLINK Terminal Mode (or any other “dumb” host) to directly monitor or modify the
variable set and command the drive. This approach should only be taken when a PC with a Windows
operating system is not available and/or you are well-versed with the variable and command set.
Each variable and command are referenced for its syntax and parameter definition. The variables and
commands are grouped alphabetically for easy look-up and are found at the end of this manual. Be sure
you review this information before you begin.
I3BSE028586R1drives are shipped from the factory already configured for a particular motor. You can verify this
by applying logic power and monitoring the Status Display. A factory-configured drive goes through a
power-up sequence flashing all segments of the display before settling out to a number indicating the
mode of operation. If the drive is not configured with a particular motor, the display will flash a minus
sign “-“, indicating that you must enter drive, motor, and application variable parameters. The remainder
of this section describes the process of setting up a non-configured3BSE028586R1
must be taken when applying power to the drive. It is factory-c3BSE028586R1
application of power. Verify that the hardware Remote Enable
(REMOTE) enable switch is disabled.
Upon powering up, the 3BSE028586R1
performs a series of self-tests. If the Status Display illuminates a
solid number, then no errors were found and the EEPROM has loaded its variable parameters (or loaded
with default values in case of invalid EEPROM data) into RAM. The Remote Enable switch on the I/O
connector (C3) may now be energized, thus enabling the servo loops.

Product picture display

Company advantages

Warranty: Seven day acceptance period, one year warranty period

Delivery period: 1-3 working days

Advantages: supply of imported genuine products, professional off production accessories, fast delivery and accurate delivery

Main products: Focus on DCS, PLC, robot control system and large servo system. Main products: various modules/cards, controllers, touch screens, servo drives.

Main brands:

ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog, PROSOFT, etc

reminder

For more products, please contact the email for inquiry 1849076084@qq.com

This article is from  https://www.onewwww.com/