REXRTOH VT-HNC100-1-23 W-08-P-0 R00958999 module

REXRTOH VT-HNC100-1-23 W-08-P-0 R00958999 module

Technical data of product parameters

The DC stabilized power supply used by Field Control Unit of the CENTUM VP uses a compact
and efficient switching regulator circuit. In this circuit, output voltage cannot be maintained if the VT-HNC100-1-23 W-08-P-0 R00958999
energy (terminal potential) of the smoothing capacitor falls below a predetermined value. The
circuit monitors the capacitor terminal voltage and regards it as power failure if the voltage falls in
the danger zone, causing the system to enter power fail mode (non-detected momentary power
failure: up to 20 ms).
Current flows to the capacitor in this circuit when AC input voltage is higher than the capacitor VT-HNC100-1-23 W-08-P-0 R00958999
terminal voltage. Since the capacitor is charged by the peak value of the input waveform, it is
required that both the effective voltage value and the peak value conform to specifications.The CENTUM VP system requires a power supply that satisfies power requirements in
accordance with EMC regulations. It is recommended that an external power supply unit is VT-HNC100-1-23 W-08-P-0 R00958999
employed in order to prevent disruptions due to momentary or extended power failure, line noise,
or lightening surges, as well as to suppress harmonic current from various devices. For selection
of the power supply unit, consult with a power unit manufacturer taking the following points into
consideration.
When the equipment is turned on, a large in-rush current flows as the capacitor is VT-HNC100-1-23 W-08-P-0 R00958999
instantaneously charged and the transformer is excited. When any equipment is turned on, this
should not cause any voltage fluctuation that could adversely affect other equipment. Do not turn
on all equipment at the same time. Start equipment one by one.
Power may be switched to backup or AC line power if in-rush current activates the overload
protection circuit on power-up. After such an overload, select an uninterruptible power unit, with
automatic-recovery

Product picture display

About us 

Ruichang Mingsheng A company specializing in the sales of module spare parts for world-renowned brands (DCS systems) (robotic systems) (large-scale servo control systems), the company’s products include distributed control systems (DCS), programmable controllers (PLC), MOTOROLA MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (IPC), industrial low screen screens (IPC) HMI SCSI (50, 68, 80 Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com