Rockwell T9110 Distributed Control System (DCS) and SCADA system interface

Rockwell T9110 Distributed Control System (DCS) and SCADA system interface

Technical data of product parameters

 T9110 otherwise agreed in writing by Schneider Electric and Customer, all on-site Services will be billed to
Customer at the then current Schneider Electric service rates. There shall be a minimum charge of four (4) hours where
hourly rates are applicable, or one (1) day where daily rates are applicable for service and travel time.
(c) When shift work other than the normal workday is required, a premium rate shall be added for Services during the
other shifts and an additional premium shall be added for work in excess of normal workday during these other shifts, in
accordance with local practice, or labor law as applicable, or as defined in a written agreement between Schneider
Electric and Customer.
(d) Service time committed in advance by Schneider Electric on the basis of pre-specified number of days shall not be
deemed to include overtime or shift work. If overtime or shift work is required on such commitments, the pre-specified
time so committed in advance shall be appropriately reduced.
(e) Unless the Schneider Electric representative has been released from the job site, or has completed his assignment,
the Customer will pay Schneider Electric charges computed as if the Schneider Electric representative was working a
normal work week, regardless of whether or not the representative is prevented from working due to delays beyond his T9110
control.
(f) Release from the job site shall entitle the representative to return to his point of origin, with travel time and expenses
chargeable to Customer.
(g) Standby time is defined as that time during which an Schneider Electric representative is requested to remain in
readiness and available for Services commencing at the convenience of the Customer. Such time shall be considered T9110
as time worked, whether or not the representative is at the job site, and Customer will be billed accordingly. If standby
time is outside normal working hours, overtime rates will be applicable. Standby time will be added to time actually
worked for the computation of overtime charges, etc.
(h) The Schneider Electric representatives reserve the right to refuse to work under hazardous conditions. All staging
and rigging required for access to equipment to be serviced shall be erected by and at the expenses of Customer or T9110
third parties and shall comply with reasonable safety requirements. The Schneider Electric representative shall comply
with all plant safety regulations given to such representative in writing. However, any protective clothing or equipment,
except the T9110 T9110

Product picture display

bout us service idea

Since its inception, the company has always insisted on pure e-commerce mode of operation, reducing the intermediate links, for customers in the first time to provide quality products and satisfactory service, for your production and procurement work to provide ‘safe, fast and convenient’ the company has a sound logistics supply system, has established a good partnership with many well-known foreign brand manufacturers.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com