TK-FTEB01 51309512-175 industrial control DCS system module

TK-FTEB01 51309512-175 industrial control DCS system module

Technical data of product parameters

Ray loss allowed is a new parameter that can also be specified in the Room Setup – see figure above. It
determines the maximum percentage of lost rays during a simulation – due to holes and leaks in
the model. This parameter used to be 20% and was hardcoded into ODEON. The default value in TK-FTEB01 51309512-175
ODEON 17 is 10%, as it has become easier to make “watertight” geometries with plane surfaces
using modern modelling tools. Moreover, it is preferable to receive a warning if there are problems
with holes or warped surfaces in the geometry, which could cause leaks of rays, hence leading to
unreliable calculations. Due to major changes in the way of handling rays, in ODEON 17 outdoor simulations – like a square
surrounded by buildings in the city – have become easier than ever. If the Ray loss allowed is set to
100%, all rays are allowed to disappear out of the geometry at some point. With this option, it is no
longer needed to construct a 100% absorbing bounding box around the room geometry to prevent TK-FTEB01 51309512-175
termination of calculation, due to excess loss of rays.The Source receiver scripts, which allow exporting and importing sources and receiver from/to the
source receiver list, now allow point sources and receivers to be outside room limits. This makes it
possible to import e.g. an orchestra from another room, then alter its coordinates using the source
group editor (previously known as source macro and shown below), in order to place the orchestra
somewhere elseThe Source group editor (previously known as source macro) has been improved to make it easy to
relocate a group of point sources. This is for example very useful when importing a complete TK-FTEB01 51309512-175
orchestra in order to be able to relocate that orchestra (the point sources). Functionality for
coordinate manipulation includes: rotating around a reference point, moving from one reference
point to another, move positions relative to current positions, align point sources relative to surfaces
– e.g. locate them 1.2 metres above the floor (ODEON uses ray tracing to achieve that and alignment
can be handled whether the initial source position is above or below floor) – plus some additional
options.

Product picture display

bout us service idea

We are able to supply equipment and spare parts from different countries and manufacturers. We can solve the trouble you find in many places or worry about the quality of our products. We have great advantage on the price, E-mail the detailed information of our products. We sincerely welcome you to inquire by phone or use!

With the business philosophy of “professionalism, integrity, innovation, cooperation and win-win”, we continue to develop new products, provide high-quality services to customers, pursue customer satisfaction to the maximum extent, and continue to develop new areas of business.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com