VE3007 12P4375X032 KJ2005X1-BA1 Emerson controller module

VE3007 12P4375X032 KJ2005X1-BA1 Emerson controller module

Technical data of product parameters

Pay attention, that VE3007 12P4375X032 KJ2005X1-BA1 with the field cable installation the cables to sensors
and actors are separated from power supply cables and in a sufficient distance from electromagnetic active devices (motors, transformators).
Cables to the input modules of the H41q/H51q systems have to be installed interference-free as possible e. g. as screened cables.
With cable connectors having a screen termination line this has to be connected to the bus bar of the I/O rack under the slot of the module.Due to the complete screening of the field wiring of HIMA communication
systems and with correct installation of the system earthing problems in
form of high energetic influences caused of flash of lightning might not occur.
If nevertheless a lightning protection should be designed, it could be provided by using special lightning protection modules. For this the module of VE3007 12P4375X032 KJ2005X1-BA1
type MTRS485 “DATA-MODUTRAB” from Phoenix company is used up
to now. The module is provided for coarse protection When testing the external cables for insulating resistance, short circuits
and wire breaks, the cables must be disconnected at both ends in order to
avoid damaging or destroying the modules with excessive voltage.
The testing for earth faults is carried out after the disconnection of the free
connectors for the sensors and control elements. The voltage connections
of the free connectors on the potential distributors must also be VE3007 12P4375X032 KJ2005X1-BA1disconnected, and the negative pole must be separated at the control elements.
If the negative pole is set up for earthed operation, the earth connection
must be interrupted while testing for earth faults. This also applies for the
earth connection of possibly existing earth fault testing facilities. The input/output modules and their free connectors are fixed with screws.
To prevent the loosening of all screws and the pulling out of the input/output modules, the 24 V DC operation voltage has to be checked for correct
polarity, level and ripple before it is connected.For functional testing check the equipment of the control cabinet completely with help of the label and/or documentation printout “I/O subrack”. All VE3007 12P4375X032 KJ2005X1-BA1
free connectors of the input/output modules have to be connected to the
allocated input/output racks, and the voltage connections of the cable connectors to the allocated voltage distributors. All control elements (control
devices) must be released by the factory management or be driven without auxiliary power.

Product picture display

bout us service idea

Since its inception, the company has always insisted on pure e-commerce mode of operation, reducing the intermediate links, for customers in the first time to provide quality products and satisfactory service, for your production and procurement work to provide ‘safe, fast and convenient’ the company has a sound logistics supply system, has established a good partnership with many well-known foreign brand manufacturers.

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com