VE3007 KJ2005X1-BA1 12P4375X012 module card controller

VE3007 KJ2005X1-BA1 12P4375X012 module card controller

Technical data of product parameters

I/O Interrupt Executing VE3007 KJ2005X1-BA1 12P4375X012- This word contains the slot
number of the specialty I/O module that generated the currently
executing ISR. This value is cleared upon completion of the ISR, run
mode entry, or upon power up. You can interrogate this word inside of
your DII or STI subroutine or fault routine if you wish to know if these
higher priority interrupts have interrupted an executing ISR. You may
also use this value to discern interrupt slot identity when multiplexing
two or more specialty I/O module interrupts to the same ISR.
I/O Interrupt Disable (IID)
and VE3007 KJ2005X1-BA1 12P4375X012
I/O Interrupt Enable (IIE)
These instructions are generally used in pairs to prevent I/O interrupts from
occurring during time-critical or sequence-critical portions of your main
program or subroutine. The I/O Event-Driven Interrupt function is used with
specialty I/O modules capable of generating an interrupt.
Use these instructions together to create a zone in your main ladder program
file or subroutine file in which I/O interrupts cannot occur. Both instructions
take effect immediately upon execution. You must specify a subroutine to be
executed upon receipt of such an interrupt.
SLC 5/02 specific: Setting/clearing the I/O interrupt enable bits (S:27 and S:28) VE3007 KJ2005X1-BA1 12P4375X012
with a programming device or standard instruction such as MVM takes effect
at the END of the scan only.
SLC 5/03 and higher processors: Setting/clearing the I/O interrupt enable bits
(S:27 and S:28) with a programming device or standard instruction such as
MVM takes effect immediately.
IID Operation VE3007 KJ2005X1-BA1 12P4375X012
When true, this instruction clears the I/O interrupt enable bits (S:27/1
through S:28/14) corresponding to the slots parameter of the instruction.
Interrupt subroutines of the affected slots are not able to execute when an
interrupt request is made. Instead, the corresponding I/O pending bits (S:25/1
through S:26/14) are set. The ISR is not executed until an IIE instruction with
the same slot parameter is executed, or until the end of the scan during which
you use a programming device to set the corresponding status file bit.

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com