Westinghouse 1C31116G04 module

Westinghouse 1C31116G04 module

Technical data of product parameters

 This bit (write) is 1C31116G04 used to initiate self-calibration. The sampling rate during self-calibration will be 2 per second. The status (read) bit is not used
and read as “0” under normal operation.
Bit 12: This bit is not used and is read as “0” under normal operation.
Bit 13: This bit (read) indicates that the module has internal memory error
(FLASH checksum, Register or Static RAM error). If this error is
present, the module error LED is lit, the point fault bit will also be set as
the condition of the module is undetermined. 1C31116G04
Bit 14: This bit is not used and is read as “0” under normal operation.
Bit 15: This bit indicates the point fault status of the module. It is the logical
“OR” of the eight individual point-quality status bits, plus the bits 1, 4,
7, and 13 of this register. A “0” indicates that all eight points have good
quality and no module error exists. When bits 1, 4, 7 or 13 of the Status
Register are not set, this bit (when set to “1”) indicates that at least one
of the points has bad quality. A subsequent read of the Point Quality
Register (Address 12, C in Hex) will reveal the point(s) that have bad
quality. The Address 12 (C in Hex) Point Quality Register contains data
only when the module fault is due to a bad point quality. This bit configures the module (write) or indicates the configuration 1C31116G04
state of the module (read). A “1” indicates that the module is configured.
Note that until the module is configured, reading from addresses 0
through 11 (B in Hex) will produce an attention status.
Bit 1: This bit (write “1”) forces the module into the error state, resulting in the
error LED being lit. The read of bit “1” indicates that there is an internal
module error, or the Controller has forced the module into the error
state. The state of this bit is always reflected by the module’s Internal
Error LED. Whenever this bit is set, an attention status is returned to the
Controller when addresses # through 11 (B in Hex) are read.This bit (read) indicates that the module is in the “Warming” state. This
state exists after power up and terminates after 8.16 seconds. The module will be in the error condition during the warm up period.

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com