WOODWARD 5466-316 power module

WOODWARD 5466-316 power module

Technical data of product parameters

La température ambiante nominale maximum dans une enceinte où un 5466-316
processeur AADvance et des modules d’E/S standard sont installés pour
assurer une fiabilité prévisible, est de +70 ºC (+158 °F) pour modules d’E/ S et de +60 °C (+140 °F) pour un processeur modules. La consommation
électrique du système et du terrain par les modules et les ensembles de
raccordement est dissipée sous forme de chaleur. Vous devez tenir
compte de l’effet de la dissipation thermique lors de conception et de
disposition de votre enceinte, par exemple, des enceintes
continuellement exposées à la lumière solaire auront une température
interne plus élévée qui pourrait accroître la température de
fonctionnement des modules. La fiabilité des modules fonctionnant aux
limites extrêmes de la plage de température pendant une période
prolongée peut être réduite.For the purpose of evaluating creepage distances and clearances, the following 5466-316
four degrees of pollution in the micro-environment are established:
• Pollution Degree 1: No pollution or only dry pollution occurs. The
pollution has no influence.
• Pollution Degree 2: Only non-conductive pollution occurs except that
occasionally a temporary conductivity caused by condensation is to be
expected.
• Pollution Degree 3: Conductive pollution occurs or dry non-conductive
pollution occurs which becomes conductive due to condensation which is
to be expected. Subject devices are to be installed in an ATEX/IECEx Certified, IP54, tool 5466-316
accessible enclosure that has been evaluated to the requirements of EN
60079-0: 2012 + A11:2013, EN 60079-15: 2010/ IEC 60079 -0 Ed 6 and IEC
60079-15 Ed 4. Enclosure is to be marked with the following: “Warning –
Do not open when energized”. After installation of subject devices into
the enclosure, access to termination compartments shall be
dimensioned so that conductors can be readily connected. Grounding
conductor should have a minimum cross sectional area of 3.31 mm²Whichever mounting method is used the minimum depth from the rear
mounting panel to the front panel and space around the base units are shown
in the illustration, if you wish to mount the controller on DIN rails, increase
this allowance by the increased depth of the DIN rails. The DIN rails must be
TS35 rail, which is a 35mm × 7.5mm standard symmetric rail.

Product picture display

bout us service idea

The company takes production suspension control system parts and components as its dominant products

As long as it is what you want, I can help you find it! Good price! Our purpose:

Build customer relationship with sincerity

Obtain customer satisfaction through service

Win the trust of customers with products

Improve work efficiency with actions

Please contact us for the products you need urgently!

You can’t find the product. Please contact us!

Products you can’t buy. Please contact us!

Email: onewwww@foxmail.com

Introduction to main products

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: supply imported original products, professional discontinued parts, fast delivery, accurate delivery time,

Main brands include ABB Bailey, GE/FANC, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, Emerson EMERSON, OVATION, MOTOROLA, XYVOM, Honeywell HONEYWELL, Rexroth, KUKA, NI, DEIF, Yokogawa, Woodward WOODWARD, Ryan, Schneider SCHNEIDER, Yaskawa, Moog MOOG, PROSOFT and other brands

reminder

For more products, please contact the email for inquiry onewwww@foxmail.com

This article from the temporal Ming sheng automation equipment co., LTD.,

link: http:www.onewwww.com